Diagnostic Radiologic Technologist (CV/Interventional Technologist)

Summary

The Cardiovascular/lnterventional Radiologic Technologist operates independently and without direct supervision as the technologist responsible for the coordination and performance of diagnostic radiology, angiographic procedures, and complex vascular and non-vascular and therapeutic procedures. These exams are performed with and without contrast materials. The purpose of these exams is to achieve diagnostic studies so that proper diagnosis and treatment will be delivered.

Duties

The incumbent's principal responsibilities are to perform lnterventional, vascular and diagnostic radiology procedures. The incumbent will also perform studies in general radiology. Performs peripheral and visceral angiography of the abdominal systems and extremities i.e. renal, hepatic, mesenteric, aortic, femoral, etc. The exams involve the use of highly sophisticated x-ray equipment such as IR fluoroscopy, pressure injectors, biplane imaging, patient monitors, etc. Such procedures may be performed in the operating room in lieu of the interventional radiology suite. The purpose of these exams is to achieve diagnostic or therapeutic studies of the vascular systems. The technologist performs angiography, venograms, myelograms, percutaneous nephrostomy, tumor ablation, vertebroplasty, pain management procedures and other special/interventional procedures. Also, perform vascular procedures in the OR, operate C-Arm, portables, CR, DR radiography, portables and various diagnostic procedures. Performs myelography of the complete spine utilizing conventional x-ray units, patient immobilizers, etc., when required. The purpose of these exams is to achieve diagnostic studies of the spinal canal. Performs microangiography, including spine, head and neck studies utilizing highly sophisticated x-ray equipment such as computerized fluoroscopy, pressure injectors, biplane imaging, patient monitors, etc. The purpose of these exams is to achieve diagnostic studies of the spinal canal. Performs most exams utilizing surgical sterile techniques. This requires "scrub-in technique," preparation of surgical trays, preparation of contrast, supplying of catheters and guide wires, sterile assurance of the patient and equipment that may come in contact with the sterile field with the purpose of assuring that all preventive measures have been taken to prevent contamination of the patient. This is done to minimize hazards associated with invasive procedures and involves the use of sterile packs, gloves, syringes, guide wires, catheters, clean-up trays, etc ., after exam is completed. Adheres to hospital infection control and safety policies/techniques with emphasis on sterile technique; the storage of steri le supplies; the disposal of body fluids and 'sharps'; proper attire; hand washing practices; and continuing education. Works with the vascular surgeon and radiologist as a member of the medical team. Must assist and anticipate the needs of the vascular surgeon and/or radiologists and the performance of the exam . Must be continuously on the alert for the patient's condition, sterile field , catheter and guide wire sizes and configurations, etc. The alertness of the individual is essential to prevent contamination, recognize patient reactions, anticipate technique factor difficulties, etc. Prepares contrast materials. These contrast materials are used in the exams performed in the special procedure area and the technologist must know the effects and reactions to the contrast. Improper use or administration of the contrast materials run the risk of patient mortality and, therefore, it is essential that a thorough understanding of the contrast material use is possessed by those who prepare it. In addition, must be continuously alert to the patient's condition and other disorders. Reactions on the part of the patient require immediate attention so that harm does not come to the patient or equipment. Practices radiation safety in order to reduce exposure to patients, staff and self. This is achieved by the use of lead aprons, lead gloves, lead shields, lead lined walls, A LARA and collimation. Film badges are worn by the technicians in compliance with radiation regulations. The incumbent must be aware of and practice the safety policies/procedures of the Medical Center and participate in quality assurance activities as directed. Properly identifies patient images. This is essential so that mistaken identity of patient images does not occur. The technician must ID the patient by full social security number and entire name in accordance of hospital policy. Responsible for the intravenous injection of contrast media and operating power injector. Performs irregular hour emergency scans on standby or on call, 24hours per day/7 days a week, coverage may be required to perform vascular exams in the OR. Work Schedule: Monday-Friday 7:30am-4:00pm plus with rotating and on call. Telework: Not authorized Virtual: This is not a virtual position. Functional Statement #: 50625-F Relocation/Recruitment Incentives: Not authorized

Qualifications

Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met. Basic Requirements: United States Citizenship: Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. Certification. All applicants must be certified in general radiologic technology by the American Registry of Radiologic Technology, Radiography (ARRT) (R). Advanced ARRT certification is required for assignments that include computed tomography (CT), magnetic resonance imaging (MRI), [or Mammography (M) duties performed independently, as applicable]. Advanced certification indicates that the incumbent [can operate independently] and has demonstrated specific clinical competency in the appropriate specialty and taken and passed the designated examination. [In modalities that require advanced certification, to support their continued development, technologists who do not possess an advanced certification may be provided on the job training with oversight from a certified radiologic technologist.] Education. Completion of a full-time training course of at least 24 months in duration (or the equivalent) in a post-high school diagnostic radiologic technology program, evidenced by a certificate or an associate degree, accredited by the Joint Review Committee on Education in Radiologic Technology (JRCERT) or from [other accrediting agencies as recognized by the Department of Education (DOE).] Credentialing Standards. Public Law 97-35, the Consumer-Patient Radiation Health and Safety Act of 1981, requires that persons who administer radiologic procedures meet the credentialing standards in 42 CFR Part 75, Standards for the Accreditation of Educational Programs and the Credentialing of Radiographic Personnel. Essentially, they must have successfully completed an educational program that meets or exceeds the standards described in that regulation and is accredited by an organization recognized by the U.S. Department of Education and be certified as radiographers in their field. English Language Proficiency. DRTs must be proficient in spoken and written English as required by 38 U.S.C. 7402(d), and7407(d). BLS certification required May qualify based on being covered by the Grandfathering Provision as described in the VA Qualification Standard for this occupation (only applicable to current VHA employees who are in this occupation and meet the criteria). Grade Determinations: In addition to the basic requirements for appointment, the following criteria must be used when determining the appropriate grade assignment of candidates: Diagnostic Radiologic Technologist, GS-9 Employees at this level are fully functional as an advanced DRT and carry out their assigned tasks independently. DRTs at this level may have varying assignments incl