hirly

Vast

Assembly Integration & Test Engineer, Satellites

Long Beach, California, United States

hirly Pro

Get in front of the people hiring at Vast

  • Reach the hiring manager at Vast on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Vast, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Vast first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Role family
Engineering
Seniority
Mid level
Stated salary
$112,340 – $230,472 per year
Country
US
Work mode
On-site / unstated
First seen by hirly
23 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Vast is developing next-generation space stations and space infrastructure using an incremental, hardware-rich, and capital-efficient approach. Vast is rapidly developing its multi-module Haven Station to support a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and supporting a growing space economy for government, corporate, and private customers. Haven Demo’s 2025 success made Vast the only operational commercial space station company to design, build, and operate its own spacecraft in orbit. Next, Haven-1 is targeted to become the world’s first commercial space station, with launch anticipated in 2027, followed by additional Haven modules. Additionally, the company recently announced two new offerings leveraging its space station components and the heritage of Haven Demo: Vast Satellite, a high-power satellite product line; and Vast Lunar Systems, power, communications, and habitats for the Moon.

Headquartered in Long Beach, California, and with more than 1,000 employees and over a billion dollars in private capital, Vast has built the facilities capable of manufacturing America’s next space station. The company plans to develop future habitats and systems for Mars, dedicated modules for government partners, and other crewed systems designed to unlock the expanding long-term space economy.

This is the founding Assembly, Integration & Test Engineer position for the satellites vertical. The team has two openings available at L2, Senior, or Staff level. You will not be inheriting a factory, a set of procedures, or a test stand — you will be building them. You own how a Vast satellite gets physically built, integrated, and proven flightworthy, from the first development unit through a production line that has to turn out flight hardware at rate.

You will write the integration flow and the test philosophy, stand up the environmental test capability and the ground support equipment, lead the campaigns that use them, and then feed what you learn back into the design so the next ten units build faster than the last. You'll do this working directly alongside the discipline leads for structures, avionics, thermal, power, GNC, and flight software.

If you want to define how spacecraft get built at a company rather than execute someone else's definition of it, this is that job.

This will be a full-time , exempt position located in our Long Beach location.

Responsibilities:

Integration & Test

Lead and own integration and test campaigns at every level of spacecraft development — component, box, subsystem, and full vehicle

Define the test philosophy for the bus: what gets acceptance tested, what gets protoqualified, what qualifies by similarity, and how that philosophy holds up as we move from a one-off development unit to rate production

Develop acceptance, qualification, and R&D test plans for spacecraft systems, and drive them through execution and closure

Work with systems and subsystems leads to defining requirements and the verification and validation plans that close them

Develop, maintain, and operate environmental test systems — random vibration, TVAC, thermal cycling, EMI/EMC, mass properties

Design, build, and maintain mechanical and electrical ground support equipment (MGSE/EGSE) and the facilities that house it

Interface with ground test software, implement flight software configuration changes for test, and work hands-on with hardware-in-the-loop test systems

Own test data: what we record, how it's reviewed, what constitutes a pass, and how results get back to the responsible engineer

Assembly & Manufacturing

Partner with Design Engineering to drive Design for Manufacture and Design for Test into the bus while the design is still moving — access, fastener reach, connector orientation, test point availability, handling and lift points

Design, procure, install, and validate assembly, test, and verification processes, including the tooling, fixtures, and work instructions behind them

Support development builds to surface early learnings and retire integration risk ahead of production ramp

Triage and diagnose failures, run deep technical investigations, and determine the path forward — containment, risk mitigation, and root cause resolution

Drive process improvements across manufacturing, test, and integration, with an explicit eye toward repeatability across many identical vehicles

Contribute to change management, assessing the risk and impact of design or process changes on build and test

Plan and specify the integration facility footprint as the program scales — clean room, integration bay, test cell, and the flow between them

Minimum Qualifications:

Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, Electrical Engineering, or a related technical discipline

8+ years of experience in test engineering, integration, or another hands-on hardware engineering role

Hands-on experience with spacecraft or complex flight hardware integration.

Experience with environmental testing, including thermal vacuum and random vibration

Experience developing and executing test plans and procedures from scratch, and writing the technical documentation that supports them (procedures, test reports, requirements, discrepancy reports)

Proficiency with at least one of C, C++, Python, or MATLAB for test automation, data reduction, or GSE control

Demonstrated ability to troubleshoot hardware failures under schedule pressure and drive them to root cause

Comfortable operating without an established process

Preferred Skills & Experience:

Able to obtain a security clearance

Master's or PhD in electrical, electronics, mechatronics, aerospace, or another engineering discipline

Strong working knowledge of satellite subsystems (C&DH, ADCS, EPS, COMM) and how they come together at the vehicle level

Experience with multi-unit or constellation builds, where the integration flow has to be repeatable across 10+ identical vehicles rather than optimized for one

Clean room operations and ESD-sensitive hardware handling experience

Hands-on with electrical test equipment (PSU, oscilloscope, DMM, spectrum analyzer)

Experience designing and implementing automated test systems for electronics

Understanding of sensors, signal conditioning, and data acquisition electronics

Familiarity with spacecraft harness design, build, and test best practices

3D CAD proficiency, preferably NX

RF testing and hardware-in-the-loop testing experience

Familiarity with IPC/J-STD workmanship standards and IPC Class 3 space applications

Launch site or launch campaign experience

Additional Requirements:

This is an on-site role at our Long Beach, CA facility

Willingness to work extended hours and weekends as required to support build and test campaigns, particularly around major milestones and launch

Ability to work in a clean room environment and around ESD-sensitive hardware

Ability to lift up to 25 lbs unassisted and work in confined or elevated spaces around flight hardware

Occasional travel to suppliers, test facilities, and the launch site

Pay Range: California

$112,340 — $230,472 USD

We calibrate level and compensation to the selected candidate's experience and demonstrated capability. We welcome applicants across a range of experience levels to apply.

COMPENSATION AND BENEFITS

Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: medical, dental, and vision coverage for employees and dependents, generous paid time off; up to 20+ days of vacation for exempt staff and

Original posting on Vast's site ↗

Listed on hirly, a job board. hirly is not the employer: Vast is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job