hirly

GCM Inc.

CNC Lathe Machinist III

Leland, NC

hirly Pro

Get in front of the people hiring at GCM Inc.

  • Reach the hiring manager at GCM Inc. on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at GCM Inc., with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at GCM Inc. first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.1M live jobs from 220,000+ employers in 190+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Role family
Skilled trades
Seniority
Senior
Country
US
Work mode
On-site / unstated
First seen by hirly
24 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Description

SUMMARY

The CNC Lathe Machinist III is required to set-up and run the most complex proven or new parts with little to no supervision. Responsible for the machining of products in order to meet customer specifications. Operation and light set-up would be done by selecting and installing tooling, updating fixturing, and pulling CNC machining programs.

CORE / LEADERSHIP

  • Self-management - knowledge of what to do and how to act in different situations.
  • Interact with organizational team members and other departments in a professional manner.??
  • Being receptive to new ideas and different opinions.
  • Quick Learner
  • Problem-solving
  • Adaptability
  • Teamwork
  • Good communication skills
  • Must be able to take verbal and written instructions and work from handmade sketches.
  • Extensive troubleshooting skills.

JOB

  • Load parts (Ability to load and run parts per Manufacturing plan or Product Specifications)
  • Monitor tooling wear and changing tools as required per tool life monitoring.
  • Inspect parts with mechanical gauges (calipers, mics, height gauges, pins, etc.)
  • Perform setups on production parts and NPI work (CFA, FA, and SCR jobs)
  • CFA – Customer Frist Article or NPI
  • FA – Internal First Article or new process
  • SCR – Customer new process or customer engineering change request
  • Perform tool, offset changes on setup, and submit a passing internal first article to QA.
  • Ability to provide feedback during Design-for-manufacturing (DFM) reviews during initial manufacturing review.
  • Provide feedback to programming on feed, speed, and tooling requirements when performing a NPI setup.
  • Meet job standard times consistently. Communicate to lead or supervisor when jobs are over or under called out standards.
  • Deburr work in process.
  • Promote the company initiative of Lean Manufacturing/Continuous Improvement projects and 5S implementation and sustainment.
  • Clock in and off operations according to sequence number of the work order.

Requirements

EDUCATION AND/OR EXPERIENCE REQUIRED

  • Minimum five to seven years work experience
  • Five years of trade school, vocational education, or four years formal apprenticeship
  • Comprehensive knowledge of theoretical and practical aspects of blueprint reading, GD & T
  • Extensive knowledge of accepted inspection practices
  • Extensive knowledge of CNC programming and G & M code
  • Extensive probe and tool pre-setter knowledge

PHYSICAL DEMANDS WHILE PERFORMING THE JOB

  • Visual acuity: near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts
  • Hearing ability: ability to monitor machine sounds to identify and diagnose changes to take appropriate action
  • Frequently required to stand, walk, push, reach overhead, and bend to the floor
  • Frequently required to sit and use hands to finger, handle, or feel objects, tools, or controls
  • Occasionally lift and/or move up to 50 pounds

WORKING ENVIRONMENT OF THE JOB

  • High noise levels from operating machines
  • Physical hazards from moving equipment and machine parts
  • Breathing fumes, dust, and mist
  • Skin exposure to oils and cutting fluids

SAFETY

  • Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices
  • Knowledge of Shop safety practices and use of PPE
Original posting on GCM Inc.'s site ↗

Listed on hirly, a job board. hirly is not the employer: GCM Inc. is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job