hirly

Kondex Corporation

CNC Programmer / Manufacturing Engineering Technician

Lomira, WI

hirly Pro

Get in front of the people hiring at Kondex Corporation

  • Reach the hiring manager at Kondex Corporation on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Kondex Corporation, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Kondex Corporation first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Role family
Engineering
Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
26 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Description

Kondex is looking for a 1st shift Manufacturing Engineering Technician/CNC Programmer.

  • Hours: 1st shift, Monday - Friday 6:00 am to 2:30 pm
  • Hours can fluctuate depending on customer requirements and training needs
  • Reports to Manager of Manufacturing Engineering

The Manufacturing Engineering Technician/CNC Programmer is responsible for performing a variety of technical assignments in direct support of engineering and manufacturing efforts, including those efforts necessary to launch new products; fixture specification, CNC programming; defining process and operating parameters; investigation and evaluation of process capabilities and problems; expediting the design and construction of prototypes; equipment specification and purchasing; assisting with machinery repairs and maintenance; and ensuring that effective operator training is in place for new and revised processes.

POSITION ACCOUNTABILITIES:

  • Specify machinery and equipment for new products and product improvements, as assigned, and oversee its installation and startup
  • Perform CNC programming in Mastercam CNC programming software, including 5 axis control programming
  • Assist in the development of tooling, fixtures, and process controls
  • Document all initiated process changes in an appropriate manner (work instructions, routings, etc) and maintain records of changes, as necessary
  • Ensure effective operator training is in place for new and revised processes
  • Perform CNC and robotic production support
  • Construct prototypes for internal and field testing, as directed by Product Engineering
  • Perform process (new product and process improvement) testing and prepare test reports, along with recommendations
  • Render technical assistance in areas of design, construction and testing of components and processes
  • Recommend suppliers and assist in qualifying new suppliers
  • Assist with PPAP and APQP activities, such as capability studies, FMEA’s, control plans, etc.

Requirements

  • Associate degree in mechanical/ manufacturing engineering or Journeyman status in appropriate technical discipline preferred. Additional experience may substitute for education preference.
  • Technical training and experience using Mastercam CNC programming software or a comparable software, including 5 axis control programming required.
  • 2-3 years of work experience in a technical role, with emphasis on multi-axis CNC programming
  • Must be able to work independently, with minimal direction and supervision.
  • Experience in designing or implementing cells, flow lines or other manufacturing processes
  • Machinery maintenance or tool and die experience
  • Experience reading company documents, such as blueprints and other instructions
  • Proficiency in using 3D software, preferably SolidWorks
  • Working knowledge of Microsoft Office required; experience with MS Project is preferred
  • Highly desirable behavioral competencies include communication team management, problem solving and decision making, high standards and organizing and planning

Kondex is an Equal Employment Opportunity Employer.

#INDOffice

Original posting on Kondex Corporation's site ↗

Listed on hirly, a job board. hirly is not the employer: Kondex Corporation is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job