hirly

Gradient Robotics

Controls Engineer

San Francisco

hirly Pro

Get in front of the people hiring at Gradient Robotics

  • Reach the hiring manager at Gradient Robotics on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Gradient Robotics, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Gradient Robotics first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
28 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

About the Company

The datacenter buildout is the largest industrial project in human history. Gradient builds the autonomous robots that make it possible.

Partnered with the world's largest AI infrastructure companies and backed by the industry's best investors, we move fast and build full-stack systems that matter.

About the Role

We're looking for a Controls Engineer to own motion from command to actuator. That means modeling and identifying the physical system, understanding exactly why an axis or arm is limited to the performance it has, and designing controllers that deliver sub-millimeter precision under real load. You'll be the person who can look at a Bode plot from the robot and explain what's in it. You'll also choose and source the motors, drives, and sensors your controllers run on, deciding where an off-the-shelf servo drive is the right answer and where we need something custom.

Responsibilities

Model and identify axes and arms using physical principles and measurement (e.g., swept-sine/chirp FRFs, step and noise-based ID, dynamic parameter identification), maintaining accuracy against hardware.

Diagnose and resolve field issues including resonances, instability, non-linearities (friction, backlash), joint compliance, latency, sensor noise, and dynamic variability.

Design and tune control loops: current, velocity, and position cascades, inverse-dynamics feedforward, notch and loop-shaping filters, and force/impedance control for contact tasks.

Select and source motion and sensing hardware (motors, drives, encoders, force/torque sensors) and fieldbus modes. Commission commercial drives (Yaskawa, Kollmorgen, Elmo, Beckhoff, etc.) and specify custom drive/loop architectures where necessary.

Develop test procedures to verify performance, and quickly iterate from failed tests to tuned revisions.

Minimum Qualifications

3+ years' experience in controls engineering on physical electromechanical systems with control loops tuned on real hardware.

Strong control theory fundamentals: frequency-domain analysis, stability margins, loop shaping, discrete-time effects, and sound judgment for controller selection (e.g., PID with feedforward).

Demonstrated system identification skills: measured FRFs, model fitting, and controller design using those models.

Experience with serial robot arms: forward and inverse kinematics (handling singularities, redundancy, joint limits), rigid-body dynamics, friction compensation

Expertise in debugging nonlinearity and bandwidth-limiting problems and explaining their root causes.

Fluency in Python for analysis and ability to write and review real-time control code in C, C++, or Rust.

Ability to work on-site in San Francisco, 5 days/week (6 days/week during crunch time).

Preferred Qualifications

Experience with force/impedance control or other contact-rich robotic manipulation.

Knowledge of precision motion technologies including ball screws, linear motors, direct drive, and air bearings.

Familiarity with EtherCAT or CANopen, CSP/CST modes, and real-time Linux environments.

Original posting on Gradient Robotics's site ↗

Listed on hirly, a job board. hirly is not the employer: Gradient Robotics is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job