hirly

Nomad GCS

Embedded Systems Engineer II

Huntsville, Alabama

hirly Pro

Get in front of the people hiring at Nomad GCS

  • Reach the hiring manager at Nomad GCS on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Nomad GCS, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Nomad GCS first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
2 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

This position requires that you must be a US Citizen for consideration and meet all Federal Contractor employee requirements. Nomad GCS does not support the H1B Visa for this position.

Nomad GCS is currently seeking a Level II Embedded Systems Engineer. Please note the Level II Expectation in red below.

This position requires onsite training at our Columbia Falls, Montana facility, beginning on hire date. Length of time for training is at the discretion of the Embedded Systems Engineering Manager.

  • Position : Embedded Systems Engineer II
  • Division : Innovative Solutions Group
  • Department : Embedded Systems & Human Factors Engineering
  • Status : Full-time

Overview: Nomad Global Communication Solutions (Nomad GCS) is a leading provider of communication and response products serving a wide range of customers. Our purpose is to be the solution when every minute matters. We are seeking Embedded Systems Engineers to help design, develop, and support the embedded hardware systems for Nomad Total Command™ (NTC) and other systems integrated into Nomad products.

Embedded Systems Engineers at Nomad GCS are responsible for the design, development, integration, testing, and lifecycle support of embedded hardware and firmware used within Nomad Total Command™ (NTC), as well as support of embedded systems across all Nomad products and platforms. This includes microcontrollers, embedded processors, sensors, control modules, communication interfaces, and operator control systems that enable deterministic control, automation, monitoring, and safe operation of capabilities across Nomad platforms.

Depending on level (I–V), Engineers progress from learning foundational engineering practices and supporting designs to independently leading complex system architectures, mentoring others, and driving technical strategy across the organization.

This position requires strong hands-on engineering capability combined with system-level thinking, enabling the engineer to diagnose complex system interactions, guide technical decisions, and improve the robustness and performance of embedded systems deployed in demanding environments.

Career Growth: Embedded Systems Engineers at Nomad GCS progress through five levels based on demonstrated technical mastery, independence, leadership, and impact. Advancement is supported through mentorship, ownership of embedded subsystems, and alignment with Nomad’s Core Values.

Organizational Structure: Engineering is organized into Teams and Disciplines within the Innovative Solutions Division.

Teams:

o Team 1 – Standards and Modularity: Builds and maintains engineering standards, modules, templates, and rules enabling repeatability and scale.

o Team 2 – Design: Executes project-level engineering using established standards and less complex custom configurations.

o Team 3 – Advanced: Develops novel systems and resolves first-of-kind engineering challenges.

o Team 4 – Manufacturing & Industrial Engineering: Ensures manufacturability, safety, engineering intent, efficiency, and continuous improvement throughout Production.

Disciplines:

o Mechanical Engineering

o Electrical Engineering

o IT Engineering

o Human Factors Engineering

o Embedded Systems Engineering (where this role is located)

o Software Engineering

An Embedded Systems Engineer may be temporarily assigned to one or more of the four Teams and support Standards and Modularity, Design Engineering, Advanced Engineering, and/or Manufacturing & Industrial Engineering.

Core Responsibilities – All Levels:

Design, develop, and support embedded hardware and firmware used within Nomad Total Command (NTC) and other Nomad platforms.

Develop firmware and control logic using C/C++ for microcontrollers and embedded processors supporting modules and control interfaces.

Write logic that bridges embedded hardware with NTC software using C/C++ and other languages.

Specify/test new embedded computers, network switches, and other hardware for NTC or other Nomad platforms.

Integrate sensors, actuators, networking interfaces, and operator control systems used by the NTC platform.

Design and troubleshoot embedded systems using CAN, SPI, I²C, UART, Ethernet, and related protocols used within various communication networks.

Ensure systems exhibit deterministic and predictable behavior, particularly in real-time or near real-time environments.

Review, edit, or write JSON based configuration files.

Implement error logging, as well as frequent “health checks” and hardware status updates.

Drive improvements in reliability through testing, diagnostics, and design iteration.

Diagnose complex interactions between hardware, firmware, networking, and electrical systems.

Work within Linux-based environments, including containerized environments (Docker).

Flash embedded firmware for micro-controlled hardware and sensors.

Write control logic & software for Programmable Logic Controllers (PLC’s).

Participate in efforts to automate and continuously improve NTC hardware configuration.

Attend meetings regarding upcoming builds, take meaningful notes, and actively participate:

Proposal Reviews;

Sales/Project Management Kickoffs;

SPN reviews, Initial Design Reviews (IDR), and Executive Design Reviews (EDR); and

Actively participate in Executive Reviews and document any findings.

Configure, or aid in configuring NTC hardware for production projects, ensuring configuration is accurate and aligns with customer requirements and intended system operation.

Assist production team(s) with troubleshooting NTC issues.

Design or assist in designing printed circuit boards (PCB’s)

Participate in design reviews, testing, validation, and root cause analysis of embedded hardware and control behavior.

Work closely with Software Engineering to define hardware abstraction layers (HAL’s) and other methods to translate software commands into hardware actions.

Assist software in defining how hardware data/control should be presented in the NTC frontend.

Develop and improve embedded systems with the goal that hardware control logic is independent of NTC software functionality.

Design systems with strong emphasis on fault tolerance, redundancy, and predictable failure behavior.

Assist field and production teams in resolving challenging system-level issues.

Prototype and test next-generation capabilities including, but not limited to:

Automation systems

Advanced sensor integration

AI-assisted monitoring

Autonomous subsystems

Vehicle information system integration (CAN)

Self-deployment capabilities (SLAM, Sensor-Fusion, Computer Vision etc.)

Edge machine learning

Predictive maintenance capabilities

Subsystem data acquisition for local inference.

Identify opportunities to improve operational awareness, system automation, and reliability.

Collaborate cross-functionally with Mechanical Engineering, Electrical Engineering, IT Integration, Human Factors Engineering, Software Engineering, Production, Quality, and Program Management teams to ensure embedded systems integrate cleanly with platform subsystems.

Apply continuous improvement principles to improve reliability, determinism, manufacturability, and maintainability of embedded hardware.

Produce clear technical documentation including:

Engineering notes

Troubleshooting guides

Test procedures

Technical design documentation

System changes, firmware updates, and hardware improvements.

Translate operational feedback into engineering improvements.

Uphold and model Nomad Core Values in all work.

Perform additional duties as assigned.

Level Expectations:

Embedded Systems Engineer l – Entry / Developing

Support senior engineers with firmware development tasks and documentation related to NTC embedded modules.

Assist with embedded development using C/C++ and microcontroller platforms used within NTC and other Nomad platforms.

Participate in

Original posting on Nomad GCS's site ↗

Listed on hirly, a job board. hirly is not the employer: Nomad GCS is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job