hirly

T1 Energy

Equipment Engineer, Wet Process

Rockdale, TX

hirly Pro

Get in front of the people hiring at T1 Energy

  • Reach the hiring manager at T1 Energy on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at T1 Energy, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at T1 Energy first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
5 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

The Role

G2 is T1 Energy’s new TOPCon solar cell fab in Rockdale, Texas. Every cell we make starts in wet process: texture, rear polish, and glass removal. When these tools stop, the fab stops. We’re hiring Equipment Engineers to keep them running.

You’ll own a set of wet chemical tools, from install through high-volume production. The set covers batch texture, RCA-clean rear polish benches, and inline BSG and PSG removal strip tools. It’s a hands-on role: most of your day is at the tool, and you’ll be trusted to make the engineering calls that keep it running.

This is an on-site role at G2 in Rockdale, Texas, day shift supporting a 24/7 fab, with an on-call rotation for critical tool-downs, and cleanroom and sub-fab work in full chemical PPE. You’ll be building a fab from the ground up: your PMs, your procedures, and your fixes become the standard, and the calls on your tools are yours to make.

What You'll Do

Own OEE, availability, MTBF, and MTTR for your toolset.

Be first on the tool when it goes down. Make it safe, diagnose the failed component, and restore it. When you escalate to the vendor, bring clear data.

Close root cause on chronic failures, wafer breakage, and leaks using 8D, FMEA, and Pareto, and verify the fixes hold.

Analyze alarm histories, maintenance records, and tool data in JMP, SQL, Python, or Excel to spot failure trends before they cause downtime.

Own the PM schedule, refine vendor PM procedures, and set critical-spares levels, then adjust both from failure history.

Keep interlocks, leak detection, and exhaust and scrubber interfaces working on tools running HF, NaOH, and HCl. You’ll do this together with EHS.

Work with Process Engineering on bath life, chemical change-out, and concentration-control hardware.

Bring tools through install, SAT, and qualification into production. Document procedures and train the technicians who run them.

Who You Are

A hands-on equipment engineer who would rather be at the tool than in a meeting.

Systematic about failure: you fix the cause, not the symptom, and you check that it held.

Decisive when a tool is down and the line is waiting.

A straight communicator with process, production, facilities, EHS, and vendors.

Comfortable and careful working around aggressive process chemistries.

Qualifications

A bachelor’s degree in Mechanical, Electrical, Chemical, or Mechatronics Engineering, or an associate degree with equivalent hands-on experience.

3+ years of hands-on equipment engineering in semiconductor, solar, or similar high-volume manufacturing.

Hands-on repair of wet bench, wet etch, wet strip, or texturing tools, including pumps, valves, heaters, filtration, and wafer handling.

Component-level troubleshooting from electrical schematics, pneumatic drawings, P&IDs, and PLC/HMI diagnostics.

A track record of eliminating a chronic equipment failure, not just repairing it again.

Safe working practice with hazardous chemicals, chemical-compatible materials (quartz, PVDF, PTFE, PFA), and LOTO.

Preferred: solar cell (TOPCon, PERC, or HJT) or semiconductor fab experience.

Preferred: greenfield tool install, SAT, and ramp experience.

About T1 Energy

At T1 Energy (NYSE: TE), we build energy. We are an American solar manufacturer building the future of energy abundance. From our headquarters in Austin, Texas, we’re pioneering a domestic solar supply chain with one mission: to invigorate America with scalable, reliable, and low-cost energy.

We started with G1_Dallas, one of the most advanced solar manufacturing facilities in the world. The 5GW facility is located in Wilmer, Texas. It has the capacity to produce more than 20,000 solar modules a day for solar farms that power American homes, businesses, and keep our energy grids resilient.

Next is G2_Austin: Our new solar cell fab in Rockdale, Texas. Its first 2.1GW phase is designed to produce next-generation TOPCon cells beginning in 2027. As the fab grows, it’s expected to support up to 1,800 manufacturing jobs. Modules assembled at G1 can run on cells from G2.

What comes after G2? Come join us and help figure that out. And then build it. The sun has always shone on America. Now you can turn it into abundant electricity.

The T1 Way

We’re all in on the mission, and we pursue it as one team. We move fast, own our results, and treat each other with respect. Egos stay at the door: no one is too senior to roll up their sleeves, and no idea is too small to share. Be sharp, be honest, be human. If you can hold the line and keep a sense of humor, you’ll fit right in.

T1 Energy is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants and do not discriminate on the basis of any legally protected characteristics.

Original posting on T1 Energy's site ↗

Listed on hirly, a job board. hirly is not the employer: T1 Energy is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job