Finisher I

E-ONE manufactures custom and commercial fire trucks including pumpers and tankers, aerial ladders and platforms, rescues of all sizes, quick attack units, industrial trucks, and ARFF (aircraft rescue firefighting vehicles).

Established in 1974, E-ONE has grown to become an industry leader in just a few decades, and today employs more than 1,000 people who manufacture over 400 fire trucks per year. Innovation has been the company's driving force and continues to be the impetus behind its pursuit of innovative technologies. The result is state-of-the-art fire rescue vehicles recognized for superior firefighting and rescue capabilities.

E-ONE is part of Terex Corporation, a global designer and manufacturer of specialized vehicles and equipment, including fire and emergency vehicles, waste and recycling equipment, RV's, and machinery supporting construction, utilities, and infrastructure. With operations across the U.S. and globally, we are committed to safety, innovation, and quality while building products our customers depend on every day.

Job Summary

Perform duties to sand, grind, mount, or repair units in preparation for welding, assembly operations, or painting. Ensure work meets specifications as part of the manufacture of large, custom, special-purpose vehicles while working within prescribed procedures and routines.

Responsibilities

ESSENTIAL FUNCTIONS:

Sand or grind parts and bevel edges in preparation for welding. Feather, flute, flat-grind, and level-grind surfaces as needed. Remove severe corners or other surface conditions that may create stress areas subject to fatigue fractures.

Remove sharp edges or burrs and identify dents, holes, and other substrate defects. Work from process sheets, shop orders, prints, schedules, pick lists, and instructions.

Review material and production requirements. Obtain and organize necessary tools and materials and move them to the work area.

Blow off and wipe down components or units to remove grit, grease, and other foreign material.

Inspect cabs, bodies, and component structures for obvious defects, including dents in panel sections, rough weld beads, fractures, uneven or wavy surfaces, and similar conditions.

Correct surface defects by applying fillers and filing or sanding areas to meet surface-finish requirements. Apply primer over corrected body areas and exposed aluminum as required.

Wire-brush welds to remove smoke and residue. Grind and remove excess weld beads to create smooth surfaces. Apply compound and buff surfaces to meet cosmetic criteria and specifications.

Recognize and report weld defects such as fractures, voids, porosity, and distortion.

Identify part surfaces requiring a smooth finish. Sand, apply polishing compound, and buff as required.

Change grades of abrasives or compounds to meet finishing requirements and prepare surfaces for future processing or final finishing.

Clean and buff surfaces such as tread plate and remove scratches from non-painted surfaces.

Remove doors or other components as necessary, place them on work stands or fixtures, and install required hinges and backup bars.

Flat-sand specified pieces and vary sander pressure to create a symmetrical pattern across the surface that meets cosmetic requirements.

Monitor the quality of work performed within the assigned area of responsibility.

Follow established work standards and procedures.

Perform work within established physical requirements, including lifting up to 45 pounds and walking, kneeling, squatting, and standing for extended periods.

Other Duties May Include

Perform or assist with other operations as required or directed to maintain workflow and respond to production requirements.

Perform additional duties as assigned by the Supervisor to help maintain production schedules.

Tools and Equipment Used

Hand and power tools, spraying equipment, forklifts, fixtures, sanders, grinders, tape measures, squares, and files.

Position Expectations

• 1. Safety
• Follow E-ONE General Health & Safety Rules and maintain safe operating conditions within the assigned area of responsibility. Notify coworkers and supervisors of hazardous acts or conditions. Properly use required personal protective equipment (PPE) and only use defect-free equipment. Promote safety within the department, use proper lifting techniques and overhead hoists when appropriate, and maintain a clean and safe work environment in accordance with the 5S philosophy. Participate in hazard communication training and safety meetings.

• 2. Quality
• Take responsibility for the quality of work performed and produce defect-free work. Understand and follow the requirements of the company's quality system as they apply to assigned duties and responsibilities. Inspect work to ensure conformance with process control instructions, specifications, and quality standards. Identify and segregate nonconforming products and assist with corrective and preventive actions when appropriate.

• 3. Flexibility
• Be willing and able to work in other areas as needed. Remain flexible with lunch and break schedules when workflow requires. Meet overtime requirements as necessary.

• 4. Initiative
• Actively participate in the continuous improvement of products and processes to better serve customers and improve company profitability. Seek additional work when current assignments are complete. Make suggestions to improve product quality, processes, safety, and profitability.

• 5. Teamwork
• Maintain a positive working relationship with other employees and contribute as a team player. Work constructively with others and follow company policies and procedures. Participate in daily production assignments and special improvement projects that support continuous improvement.

• 6. Career Development
• Attend and participate in meetings, training programs, and task force groups as appropriate. Communicate issues, obtain necessary approvals, resolve problems, and maintain knowledge of changes to equipment, processes, procedures, requirements, and company policies.

• 7. Leadership
• Lead the team and provide innovative thought leadership on strategies that support market growth, profitability, and long-term business goals.

• 8. Action-Oriented
• Demonstrate a strong work ethic, energy, and willingness to act. Take initiative and identify opportunities for improvement.

• 9. Conflict Management
• Address conflicts constructively and view them as opportunities to resolve issues. Listen effectively, identify common ground, and work toward fair and practical solutions.

• 10. Dealing with Ambiguity
• Effectively adapt to change and shifting priorities. Make appropriate decisions when complete information may not be available and remain comfortable working through uncertainty.

• 11. Drive for Results
• Consistently work toward achieving goals and expected results. Maintain a results-oriented approach and demonstrate persistence in completing assigned work.

Minimum Requirements

• •High school diploma or GED equivalent
• •Effective written and verbal communication skills
• •Good math skills
• •Forklift license or ability to obtain an E-ONE-issued forklift license
• •Recordkeeping abilities
• •Knowledge of and adherence to E-ONE safety practices

Physical Requirements

• •Lifting/Pushing/Pulling: Exert up to 40 pounds of force frequently and/or up to 20 pounds of force constantly to move objects.
• •Climbing: Ascend or descend ladders, stairs, scaffolding, ramps, poles, and similar structures using feet, legs, hands, and/or arms.
• •Stooping: Bend the body downward and forward at the waist.
• •Kneeling: Bend the legs at the knees to rest on one or both knees.
• •Crouching/Crawling/Reaching: Bend the body downward and forward, move on hands and knees or hands and feet, and extend hands and arms in various directions.
• •Standing: Stand for sustained periods of time.
• •Walking: Move on foot to perform tasks, including walking long distances or moving between work areas.
• •Visual Acuity: Pos