hirly

Figureai

Harness Integration Technician

San Jose, CA

hirly Pro

Get in front of the people hiring at Figureai

  • Reach the hiring manager at Figureai on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Figureai, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Figureai first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
24 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.

We are looking for a Wire Harness Technician. In this role, you will be highly focused on designing and building wire harnesses and custom cables to enable test setups required for rapid iteration across development, validation, and integration efforts. You will operate in a fast-paced prototyping and low-volume environment, building production-quality harnesses as well as on-demand, non-standard cable solutions that directly unblock engineering and testing teams. You will build harnesses from drawings, BOMs, and work orders while meeting IPC/WHMA standards and aggressive delivery timelines.

Responsibilities:

Build build-to-print and custom wire harnesses, including cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, and final terminations.

Create custom cables and harnesses on demand to support test setups, debugging, EVT/DVT activities, and rapid hardware iteration, often with evolving or incomplete requirements.

Partner closely with engineering and test teams to quickly translate test needs into practical cable and harness solutions.

Read and follow drawings, schematics, BOMs, work orders, and ECOs; record traceability in ERP/routers.

Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling; document pull tests when required.

Print and apply labels and heat-shrink markers per print.

Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMMs, cable testers, and fixtures.

Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment.

Maintain 5S/ESD and safety standards; proactively suggest process, tooling, and DFM improvements—especially for testability and iteration speed.

Requirements:

2–5+ years building wire harnesses and cable assemblies in manufacturing or prototyping environments.

Strong ability to independently design and execute custom cable builds for test and prototype use.

Ability to read prints/schematics and follow work instructions with minimal supervision.

Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax, twisted pair).

Hands-on experience with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns.

Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001.

Strong quality and schedule focus, with high first-pass yield and low rework in fast-iteration environments.

Bonus Qualifications:

Current IPC/WHMA-A-620 or J-STD-001 certifications.

Experience supporting test labs, EVT/DVT builds, and rapid iteration cycles.

Experience with cable testers (e.g., Cirris) and basic fixture integration.

Exposure to ECOs/NPI, startup environments, and creating or maintaining SOPs.

Basic comfort with CAD viewers for drawing review and ERP systems for traceability.

Bilingual English/Spanish.

The US base pay range for this full-time position is $30.00 to $50.00 per hour.

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Original posting on Figureai's site ↗

Listed on hirly, a job board. hirly is not the employer: Figureai is hiring for this role.

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job