hirly

Nomad GCS

Industrial Engineer III

Columbia Falls, Montana

hirly Pro

Get in front of the people hiring at Nomad GCS

  • Reach the hiring manager at Nomad GCS on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Nomad GCS, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Nomad GCS first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Senior
Country
US
Work mode
On-site / unstated
First seen by hirly
27 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

This position requires that you must be a US Citizen for consideration and meet all Federal Contractor employee requirements. Nomad GCS does not support the H1B Visa for this position.

Position: Industrial Engineer III

  • Division : Innovative Solutions Group (ISG)
  • Department : Manufacturing & Industrial Engineering

Status : Full-Time

Nomad GCS is currently seeking a Level III Industrial Engineer. Please note the Level III Expectation in red below.

Overview: Nomad Global Communication Solutions (Nomad GCS) is a leading provider of communication and response products serving a wide variety of customers. Our purpose is to be the solution when every minute matters. We seek a candidate that is self-inspired to learn and demonstrates a high degree of customer service while positively contributing to our team.

The Industrial Engineers (IEs) at Nomad GCS are responsible for designing, developing, and optimizing scalable production systems that support Nomad’s primary vehicle/product assembly operations. This includes the development of main vehicle assembly lines, creation of feeder cells that support those lines, and the continuous improvement of material flow, labor utilization, and production efficiency. IEs focus on system-level production architecture — ensuring that the right work happens at the right station, at the right time, with the right resources. Being able to learn on-the-fly is required. All solutions must adhere to or exceed Nomad’s standards of safety, efficiency, quality, and scalability.

Career Growth: Advancement is based on measurable improvements to throughput, cost, scalability, and production stability. Industrial Engineers progress through five levels based on demonstrated capability in:

Assembly line design

Feeder cell integration

Capacity modeling

Production flow architecture

Lean implementation

Leadership and organizational impact

  • Organizational Structure:
  • Nomad Engineering is organized into Teams and Disciplines within the Innovative Solutions Division.

Teams:

Team 1 - Standards and Modularity: Builds and maintains engineering standards, modules, templates, and rules enabling repeatability and scale.

Team 2 - Design: Executes project-level engineering using established standards and less complex custom configurations.

Team 3 - Advanced: Develops novel systems and resolves first-of-kind engineering challenges.

Team 4 - Manufacturing & Industrial Engineering: Ensures manufacturability, safety, engineering intent, efficiency, and continuous improvement throughout Production.

Disciplines:

Mechanical Engineering

Electrical Engineering

IT Engineering

Human Factors Engineering

Software Engineering

Manufacturing (MFE) & Industrial Engineering (IE) (where this role is located)

Industrial Engineers operate primarily within Manufacturing & Industrial Engineering (Team 4), collaborating closely with:

ISG - Standards & Modularity (Team 1)

Production Leadership

Supply Chain

Quality Assurance

Program Management

Team 4 contains both IEs and MFEs. These roles are differentiated in that the IEs are to focus on how we build it efficiently and at scale, whereas the MFEs are to focus on how we build the product correctly and repeatably.

Basic Knowledge Desired – All Levels:

Industrial engineering principles (time studies, work measurement, line balancing, takt time analysis) .

Lean manufacturing tools (VSM, 5S, Kaizen, SMED, standard work) .

Facility layout and material flow optimization .

Capacity planning and production modeling .

ERP/MRP systems .

Data analysis (Excel required, others encouraged) .

Production economics and cost analysis .

Understanding of fabrication, welding, mechanical assembly processes .

Strong cross-functional communication skills .

Demonstrated alignment with Nomad Core Values .

Core Responsibilities – All Levels:

Design and implement scalable vehicle/product assembly lines .

Develop feeder cells to support main line flow .

Perform line balancing based on takt time and demand forecasts .

Conduct time studies and labor utilization analysis .

Assist in developing standard work documentation .

Optimize material presentation and flow to point-of-use .

Analyze and improve production capacity constraints .

Support layout redesigns to improve throughput and safety .

Drive continuous improvement initiatives .

Analyze production data to identify bottlenecks .

Support new product introductions with line integration planning .

Collaborate with Manufacturing Engineers to ensure manufacturable designs .

Travel as needed .

Perform additional duties as assigned .

Level Expectations:

  • Industrial Engineer
  • l – Entry / Developing

Assist in time studies and line balance analysis .

Participate in layout planning and workstation design .

Learn takt-based production planning .

Support feeder cell documentation and setup .

Exposure to multiple vehicle full-build cycles (at least 5) .

Bachelor’s degree in Industrial Engineering or related field OR 0–2 years ’ experience .

Primary Focus: Learning production flow fundamentals

Progression Signal: Accurately collects and analyzes production data and supports measurable improvements

  • Industrial Engineer
  • ll – Independent Contributor

Independently conduct time studies and labor analysis .

Develop line balancing models based on takt time .

Design and optimize feeder cells supporting main assembly line .

Create and maintain documentation for Line/Flow functions .

Support capacity planning for mid-term production forecasts .

2–5 years industrial/manufacturing engineering experience

Primary Focus: Reliable line optimization and execution

Progression Signal: Improves line efficiency, reduces imbalance, and supports stable throughput

Industrial Engineer lll – Advanced / System-Level

Lead development of full vehicle assembly lines .

Architect feeder cell integration strategy .

Perform facility layout redesigns to improve flow .

Identify and eliminate production bottlenecks .

Develop scalable production models supporting growth .

Conduct cost-per-unit analysis and labor optimization modeling .

Mentor Level l – ll IEs .

5–8 years industrial/manufacturing engineering experience

  • Primary Focus: System-level production architecture
  • Progression Signal: Designs lines that run predictably at planned takt with reduced disruption
  • Industrial Engineer
  • l V – Senior / Technical Lead

Own production flow strategy across multiple vehicle platforms .

Define standard methodology for line and feeder cell design .

Lead capacity expansion initiatives .

Drive automation feasibility analysis .

Influence facility layout planning and capital investment decisions .

Develop enterprise-level standard work systems .

Coach and mentor industrial engineering team .

8–12+ years industrial engineering leadership experience .

Primary Focus: Platform-level scalability and architecture

Progression Signal: Delivers sustainable throughput improvements across departments

Industrial Engineer V – Principal / Strategic Leader

Define long-term production system architecture .

Develop scalable line strategies for multi-year growth .

Lead enterprise-wide Lean transformation initiatives .

Drive automation, modular production, and digital manufacturing adoption .

Translate business demand forecasts into facility and staffing strategies .

Influence capital allocation and expansion strategy .

Mentor senior leaders and engineers .

12+ years organizational-level industrial engineering leadership .

Primary Focus: Enterprise-level production strategy

Progression Signal: Shapes how Nomad builds at scale

Basic Knowledge Progression:

Level l : Foundational time studies and standard work

Level ll : Line balancing and feeder cell execution

Level lll : System-level flow and bottleneck eliminati

Original posting on Nomad GCS's site ↗

Listed on hirly, a job board. hirly is not the employer: Nomad GCS is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job