hirly

Standard Calibrations Inc

Instrumentation/Controls Technician

Chesapeake, VA

hirly Pro

Get in front of the people hiring at Standard Calibrations Inc

  • Reach the hiring manager at Standard Calibrations Inc on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Standard Calibrations Inc, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Standard Calibrations Inc first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
26 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Description

The Instrumentation/Controls Technician tests, calibrates, and repairs electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards, and assists in formulating calibration standards by performing the following duties.

Role and Responsibilities

  • Diagnose and repair complex control system malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems.
  • Troubleshoot and repair controls hardware including controllers, relays, measurement devices, actuators, etc.
  • Assists staff in design and development of products, systems, processes, and/or equipment b analyzing technical problems and working closely with customer specifications. Involves third party vendors and suppliers in the quoting process as required.
  • Assists Application Engineer in the electrical engineering; primarily supporting the design and development stages.
  • Communicate with personnel on a daily basis to review production and quality metrics and discuss any issues or concerns from the previous day.
  • Calibrate Inspection, Measurement, and Test Equipment (IM & TE) in order to ensure compliance with published specifications in one of the following disciplines: electrical, dimensional, optical, physical/mechanical and chemical.
  • Collect, compile, measure, summarize, and record data gathered during calibration.
  • Identify IM & TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc.
  • Identify and correct measurement errors, as applicable.
  • Prepare calibration reports and certificates.
  • Assist with onsite electrical work (troubleshoot, repair, install) as needed.
  • Prepare and submit required condition reports, including conditions found, electrical/dimensional measurements with comparisons to tolerances, results of tests, sketches, recommended repairs, recommended process improvements, and any other pertinent data.

Requirements

Educational / Training requirements

  • BS degree in Engineering/Technical studies, military technical school, or equivalent work experience or 5+ years of controls experience in programming development, start up, and commissioning of complex systems - central plants, air handling units, and evaporative cooling/humidification systems.
  • Knowledgeable in basic electronics and computers.
  • Experience in calibrating Inspection, Measurement, and Test Equipment (IM & TE)
  • Strong math skills.
  • Must be able to pass a pre-employment drug screen.
  • Must meet background check requirements for various base and/or shipyard access.

Safety

It is SCI’s policy to require safe operations and practices from all employees and to ensure our management team focuses on maintaining a safe working environment even while working in hazardous work environments.

  • Approved Class B hard hat in required areas and locations
  • Non-conductive PPE in required areas and locations
  • Electrical hazard, safety-toe shoes
  • Insulated and protector gloves (job task specific)
  • Eye protection
  • Hearing protection protective clothing (job task specific)

Environment

  • Exposure to hazardous noise areas
  • Varying degrees of cleanliness
  • Exposure to hot and cold climates
  • Able to work in confined spaces.

Travel

Travel is primarily local during the business day, although some out-of-the-area and overnight travel may be expected.

Physical Requirements

  • Ability to lift, carry and transport heavy equipment and boxes weighing up to 50lbs up to 8-10 hours per day.
  • Ability to work on and climb ladders and stairs frequently
  • Bending/squatting/kneeling/stooping/crouching/crawling/twisting up and walking up to 8-10 hours per day
  • Standing- must be able to stand or sit in one place up to 8-10 hours per day.

AAP/EEO Requirements

Standard Calibrations, Inc. is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law.

#IND123

Original posting on Standard Calibrations Inc's site ↗

Listed on hirly, a job board. hirly is not the employer: Standard Calibrations Inc is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job