LOCK AND DAM OPERATOR

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel within the DoD to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This permanent, full-time position is with the St. Paul District. The position performs a variety of maintenance, repair, and operational duties at a navigation lock and dam.

Duties

• •Handles bow or stern lines, walks lines to proper locations along wall and snubs lines to assist pilot in maneuvering craft into position.
• •Operates electrical or electronic gate control to open or close gates at one end of the lock chamber.
• •Removes debris or ice in path of gates or in lock wall recesses to avoid equipment or machinery damage.
• •Operates electrically, electronic, or hydraulically controlled valves controlling flow of water for emptying landfilling operation.
• •During double lockages, operates electrical tow haulage unit as applicable to move barges into and out of lock chamber.
• •Operates electrical or electronic controls to raise or lower dam gates in accordance with specific instructions regarding time and degree of gate change.
• •Performs work required for the installation, repair and maintenance of lock or lock and dam machinery and equipment of mechanical or electrical type; concrete work, etc.
• •Performs continuing and special operational or functional checks on machinery to avoid untimely or dangerous equipment breakdown.

Qualifications

Who May Apply: US Citizens Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications at WY-05 (Screen Out Element): Ability to do the work of a Lock and Dam Operator without more than normal supervision. Ability to perform common tasks including various maintenance or repair tasks utilizing mechanical or electrical equipment. Operate simple electrical or mechanical equipment such as lawn mower, hedge clippers, floor buffer, jackhammer, power threader, or power wrench. Work is under supervision of a work leader or journey-level employee who reviews work for completion. - Failure to meet this Screen Out Element will result in an ineligible rating. Minimum Qualifications at WY-07 (Screen Out Element): Ability to do the work of a Lock and Dam Operator without more than normal supervision. Ability to perform common tasks including operating lock chamber gates and lock chamber emptying and filling valves manually or by using simple mechanical equipment. Operate radio, hydraulic pumps, air compressor, standby generators and tow haulage equipment. Perform preventative maintenance tasks such as oiling and greasing cables, chains, and pulleys; cleaning and painting lock fixtures or other appurtenances; cleaning, sharpening and repairing tools and equipment. Work is under supervision of a work leader or journey-level employee who reviews work for completion. - Failure to meet this Screen Out Element will result in an ineligible rating. Minimum Qualifications at WY-09 (Screen Out Element): Ability to do the work of a Lock and Dam Operator without more than normal supervision. Ability to perform common lock operations tasks such as: operating electrically or hydraulically controlled lock and dam equipment, gates and valves. Make minor repairs to lock and dam equipment; apply locking procedures, policies, and laws regarding traffic right-of-way, sequence of operations and safe passage of hazardous commodities and damaged crafts; and comply with governing safety practices and procedures. Work is under normal supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed. - Failure to meet this Screen Out Element will result in an ineligible rating. Physical Effort: Eye and hand coordination for operating various controls and handling lines while observing traffic and personnel, during crane lifting operations, lifting dam gates, etc. There is standing, stooping, bending, occasional lifting in excess of 50 pounds, stretching, working in cramped positions and spaces, handling or maneuvering bulky items or equipment, and general continuous moderate to arduous physical effort required. Working Conditions: Preponderance of work is performed outside subject to extremes of temperature and weather. There is exposure to injuries associated with working in restricted areas, occasionally cramped or uncomfortably hot or cold areas, from falling objects, from working with electrical power tools, and from falls while working on lock walls, dam service bridge, etc. While possibility of drowning exists as a result of falls while working around water, hazard is practically eliminated through observance of safety procedures and use of safety equipment. During maintenance operations is occasionally exposed to unpleasant fumes, dust, etc. Management may select at any of the grade levels announced. This position has promotion potential to the WY-09. Promotion is never automatic. Promotion is based on the recommendation by the supervisor that employee meets all necessary qualification requirements for promotion, is performing the full scope of the major duties, and is functioning under the supervisory controls as stated in the target job description.