hirly

North American Specialty Laminations LLC

Maintenance Apprentice

Osseo, WI

hirly Pro

Get in front of the people hiring at North American Specialty Laminations LLC

  • Reach the hiring manager at North American Specialty Laminations LLC on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at North American Specialty Laminations LLC, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at North American Specialty Laminations LLC first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Entry level
Country
US
Work mode
On-site / unstated
First seen by hirly
26 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Description

NASL is seeking a Maintenance Apprentice who supports the reliability and safety of production by assisting with preventive maintenance, basic repairs, troubleshooting, and continuous improvement projects across multiple departments and facilities. This entry-level role combines hands-on work with structured training to build foundational skills in mechanical, electrical, pneumatic, and hydraulic systems.

Responsibilities include, but are not limited to,

  • Perform Preventative Maintenance tasks (lubrication, inspections, adjustments, filter changes) per schedule and document work in the CMMS.
  • Assist technicians in diagnosing and repairing mechanical, electrical, pneumatic, and hydraulic issues to minimize downtime.
  • Follow Lockout/Tagout (LOTO), machine guarding, and hazard communication procedures at all times; maintain clean, safe work areas (5S).
  • Routinely check belts, bearings, chains, knives, cutters, dust collection connections, and guards; replace consumable materials/parts.
  • Use a multimeter to verify voltage, continuity, and fuses; replace cord ends, sensors, and limit switches as needed.
  • Inspect air lines, regulators, valves, cylinders, and hydraulic hoses; assist in replacing seals and tightening fittings.
  • Help maintain compressors, dust collection systems, lighting, HVAC, and emergency systems.
  • Log work orders, parts used, and downtime causes; update equipment history and contribute to root-cause notes.
  • Assist with squaring, alignment, machine offsets, and simple calibration checks.
  • Installation and movement of equipment within the facility.
  • Shadow senior technicians on complex repairs.
  • Source and purchase replacement equipment, tools, and parts when directed.
  • Work independently to complete list of projects in timely fashion.
  • Maintain clear communication with senior technicians and operators.

Requirements

Education, Experience, and Skills

  • High school diploma or GED.
  • Basic mechanical aptitude; able to use hand/power tools and read a tape, calipers, and micrometers.
  • Fundamental electrical knowledge (AC/DC basics, reading simple schematics and basic PLC inputs/outputs).
  • Two years of manufacturing environment experience.
  • Willingness to work safely and follow procedures.
  • Technical diploma/certificate (Industrial Maintenance, Mechatronics, Electrical, HVAC, or similar) preferred.
  • Welding experience.
  • Experience in a manufacturing environment (wood products/cabinetry a plus).
  • Familiarity with 5S, LOTO, dust collection fundamentals.
  • Troubleshooting mindset; curious and systematic, solution oriented.
  • Clear communication with operators, engineers, and leadership.
  • Time management—able to prioritize PMs vs. urgent repairs.
  • Teamwork and coachability; accepts feedback and applies learning.
  • Computer literacy (ERP, email, basic spreadsheets).
  • Ability to uphold company Core Values of Integrity, Solutions, Service and Quality as part of the NASL Team.
  • Ability to work in the following environment: Industrial manufacturing floor with moderate to high noise and heat levels.
Original posting on North American Specialty Laminations LLC's site ↗

Listed on hirly, a job board. hirly is not the employer: North American Specialty Laminations LLC is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job