hirly

LMU

Manager of Laboratory Facilities – Mechanical Engineering

Westchester Campus

hirly Pro

Get in front of the people hiring at LMU

  • Reach the hiring manager at LMU on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at LMU, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at LMU first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Lead / management
Country
US
Work mode
On-site / unstated
First seen by hirly
27 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Under general supervision this position will manage, operate, and maintain all fabrication-related and machine shop teaching and research laboratories and equipment in the Department of Mechanical Engineering. This position will support the manufacturing needs for mechanical engineering courses and faculty and student research and design efforts, including faculty and student research projects, capstone projects, and student club design projects. Provide instructional and project assistance and support to engineering students in accordance with assignments and directions from the Department Chair, course instructors, project advisors, or other academic personnel. Provide technical assistance and training to students, faculty and staff in the use of manufacturing equipment and technology in instructional programs. Monitors and maintains laboratory equipment and operations and conducts preventive maintenance as necessary. Provides instructional support for the students enrolled in engineering classes and labs requiring technical competence. Trains, oversees and supervises machine shop Work Study and Teaching Assistant students.

This position is expected to manage, control, and maintain efficient and orderly laboratory facilities and equipment; ensure proper maintenance, calibration and compliance of all current and future equipment; recommend and purchase equipment and equipment replacements; construct new equipment or modify existing equipment to better fit student laboratory operations and faculty research; keep abreast with current skills; and when called upon, be able to help the faculty to set up, supervise and assist in laboratory courses.

Position Specific Responsibilities:

1. Support instructional function in the Department of Mechanical Engineering courses that have manufacturing needs. In conjunction with the mechanical engineering faculty and other technical staff, plan and assist in the preparation and delivery of mechanical engineering courses.

Engage students in an active learning environment;

Assist faculty members with course-related manufacturing needs;

Aid in the development and delivery of appropriate manufacturing exercises and learning activities;

Prepare equipment/instrumentation by setting-up equipment for student usage, assuring proper working order of equipment, and ensure safe usage of the equipment by students;

Conduct demonstrations and training on equipment/instrumentation;

Design and fabricate teaching and instructional tools and fixtures to support course delivery as necessary.

Primarily support the Department of Mechanical Engineering, but may be tasked to conduct any of the above for the Seaver College of Science and Engineering at large, pending available capacity and supervisor approval.

2. Support the faculty and student research and design project needs within the Department of Mechanical Engineering. In conjunction with the faculty and other technical staff, assist in supporting the manufacturing needs of faculty and students.

Engage students in an active learning environment;

Assist faculty members and students with manufacturing research and design project components and research experimental setups;

Aid in the selection and development of appropriate manufacturing methods and setups;

Prepare equipment/instrumentation by setting-up equipment for student usage, assuring proper working order of equipment, and ensure safe usage of the equipment by students;

Train, supervise, and assist students with the manufacturing of design and research projects;

Assist with the design and fabrication of experimental testing fixtures as necessary.

Primarily support the Department of Mechanical Engineering, but may be tasked to conduct any of the above for the Seaver College of Science and Engineering at large, pending available capacity and supervisor approval.

3. Ensure compliance with safety regulations. Facilitate a safe laboratory environment, including but not limited to the following:

  • Orient students, faculty, and staff on the procedures used to facilitate learning;
  • Supervise students in the proper use of equipment and safe manufacturing and laboratory techniques;
  • Train faculty and students on proper use of equipment;
  • Maintain equipment user training and usage log books;
  • Advise and ensure use of personal protective equipment, and safe handling, storage, and disposal of potentially hazardous chemicals.

4. Perform preventive maintenance on equipment.

Organize, maintain and ensure operating condition of all equipment contained within the laboratories;

Maintain inventory of all equipment contained within the laboratories inclusive of borrowed equipment;

Troubleshoot malfunctioning equipment;

Conduct calibration of equipment/instrumentation;

Make minor repairs of equipment when needed and recommend contracting of major repairs with well-chosen vendors;

Assist in the recommendation of purchase of new and replacement equipment.

5. Maintain clean and organized working laboratory facilities.

  • Conduct regular preventative maintenance of equipment;
  • Purchase consumables and keep orderly accessible inventories of supplies;
  • Be familiar with documentation including manuals safety documents and contacts;
  • Collaborate in scheduling to effectively use shared laboratory facilities;
  • Maintain inventories of materials and advise regarding supply orders as necessary.

6. Oversee Work Study students and Teaching Assistants in any of the above activities.

  • Train, oversee and supervise both graduate and undergraduate Work Study and Teaching Assistant students to support machine shop and manufacturing work;
  • Ensure students follow all operational and safety instructions.

7. Represent LMU within the engineering community and at professional organizations or associations, serve on committees as requested.

8. Perform other duties in the lab classroom and research lab settings.

Loyola Marymount University Expectations

Exhibit behavior that supports the mission, vision, and values of the university. Communicate and employ interpersonal actions that model high standards of professional, responsible, accountable, and ethical conduct. Demonstrate a commitment to outstanding customer service.

Experience/Qualifications

Typically a Bachelor’s Degree in engineering technology or related field or two years of trade school/technical arts training with machine shop equipment. Incumbent will be expected to continue upgrading knowledge, skills, and abilities needed to keep abreast of new technology, and regulation/policy changes.

Minimum three years of progressively responsible journey-level experience in the operation, maintenance, and repair of equipment. Completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair may substitute for experience. Familiarity with: the operation of computer numerical control machines; the operation of manual machine tools; the operation of welding and forming tools; and with controllers/process controllers and their interfaces with mechanical processes.

Familiarity with the operation of various manufacturing and machine shop equipment, including but not limited to: manual and CNC mills, lathes, wire EDM, water jet, laser cutter, band saw, drill press, sheet metal forming, grinding and polishing wheels, welding equipment, hands tools, etc.

Demonstrated skill at interacting effectively with a diverse student body, faculty, and other staff members. Must be ready to support the success of women and other underrepresented groups in engineering by serving as a role model to students who tolerates no form of harassment or discrimination, including against gender and sexual minorities.

Strong troubleshooting skills.

Demonstrated understanding of technical drawings, dimensioning, and tolerances is required.

Demonstrated competency in CAD softw

Original posting on LMU's site ↗

Listed on hirly, a job board. hirly is not the employer: LMU is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job