hirly

Proxima Fusion

Manufacturing Engineer

Munich

hirly Pro

Get in front of the people hiring at Proxima Fusion

  • Reach the hiring manager at Proxima Fusion on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Proxima Fusion, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Proxima Fusion first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
DE
Work mode
On-site / unstated
First seen by hirly
1 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

WHO WE ARE

Proxima Fusion is Europe’s fastest-growing fusion company and the continent’s best-funded fusion player, as well as the first spin-out from the Max Planck Institute for Plasma Physics (IPP). Backed by over €650M and powered by a growing team across Munich, Zurich, and Oxford, we are developing the hardware and infrastructure needed to deliver the world’s first commercial stellarator fusion power plant.

Our concept advances the most mature fusion technology out there, the Wendelstein 7-X stellarator, through two next-generation machines: Alpha and Stellaris. Our work combines stellarator optimization, advanced computation, machine learning, and high-temperature superconducting magnets to unlock higher-performance designs that were previously out of reach.

Turning these designs into a functioning fusion power plant requires excellence and ownership across every discipline, from physics and engineering to software, manufacturing, law, and business functions.

BY JOINING OUR TEAM YOU’LL GET TO

Build the machine that builds the machine . Join TechOps at the forefront of advanced manufacturing, we’re building the production system that will enable commercial fusion. The Production lines, tooling, and processes are being developed from the ground up; you'll create the ways of working, not inherit them.

Work at the frontier of manufacturing technology . Bring your creativity to evaluate, qualify, and deploy processes with no industry playbook, every component you build and every process you shape goes directly into the core of the stellarator magnet technology.

Do work that matters, and see it grow . The hardware you build is the product and your career grows with it, from prototyping and process development through quality and industrialization, alongside exceptional colleagues from around the world.

Make an impact you can point to . In a small, fast-moving team, your calls on equipment, quality, and process directly shape how a world-class deep-tech company produces superconducting magnets with results visible on the shop floor, not buried in a slidedeck.

YOUR IMPACT

Develop and industrialize the manufacturing processes used to build HTS magnet coils.

Translate magnet designs into repeatable, high-yield production processes in collaboration with design, physics, and production teams.

Own the tooling, fixtures, and quality systems required to deliver consistent and reliable manufacturing outcomes.

Lead process development from prototype builds through the transition to full-scale manufacturing.

WHAT YOU WILL DO

Develop, qualify, and continuously improve manufacturing processes for HTS coil winding, insulation, impregnation, and joining, working closely with magnet design and materials engineers.

Drive design-for-manufacturing/design-for-assembly (DFM (Design for Manufacturing)/DFA (Design for Assembly)) collaboration with the design team, acting as the manufacturing voice in design reviews to keep coil designs buildable, scalable, and serviceable.

Design, procure, and validate tooling, fixtures, and jigs for precision winding and assembly of non-planar coil geometries, including capability studies where needed.

Define assembly sequences, work instructions, SOPs (Standard Operating Procedures), and visual aids for technicians, and maintain this documentation as designs evolve.

Define and implement process controls and inspection methods (dimensional, electrical, structural) to catch defects early and protect conductor integrity.

Lead NPI (New Product Introduction) campaigns, process trials and pilot builds, and provide hands-on floor support during prototype and early production builds.

Lead root-cause analysis and corrective actions (8D (Eight Disciplines problem-solving methodology), 5-Why, fishbone, etc.) for yield, quality, and cycle-time issues, and apply Lean/Six Sigma principles to drive measurable process improvement.

Support supplier qualification and incoming inspection criteria for tooling, components, and outsourced subassemblies.

Manage engineering/process change control as designs and processes mature.

Collaborate cross-functionally with design, quality, supply chain, and test engineering to resolve manufacturability issues early and support the ramp from prototype to serial production.

WHO YOU ARE

3+ years specifying, procuring, installing, commissioning, and qualifying production equipment and/or automation for component manufacturing lines and/or assembly cells — including RFQ (Request for Quote) ownership, supplier management, FAT (Factory Acceptance Test)/SAT (Site Acceptance Test), and production ramp.

Hands-on experience designing tooling and fixtures for low-volume, high-precision production, and proficiency in CAD (Computer-Aided Design) (SolidWorks, CATIA, or similar) plus a solid grasp of GD&T (Geometric Dimensioning and Tolerancing).

Track record of writing clear work instructions, SOPs, and process documentation in a production or NPI(New Product Introduction) environment.

Working knowledge of process control, statistical methods, and structured root-cause problem solving (SPC (Statistical Process Control), FMEA (Failure Mode and Effects Analysis), 8D).

Experience supporting prototype or first-article builds directly on the floor, not just from a desk.

Strong communication skills in German or English.

Bachelor's or Master's degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related field.

Nice to have:

Experience with Product Lifecycle Management (PLM) systems for engineering change control and manufacturing documentation management (e.g. Arena, Enovia).

Experience with Manufacturing Execution Systems (MES)/Platforms (e.g. Tulip, Delmia).

Experience working in a research-to-product transition environment, where designs and processes evolve rapidly.

Experience scaling a process from prototype to serial production in a startup or fast-moving environment.

INTERVIEW PROCESS

Recruiter Interview (30-60 min)

Technical Screening (30 min)

Technical Panel (3x60 min)

CEO call (30 min)

This role sits at L2/L3 of our framework, please inquire during the recruitment process for further information

At Proxima Fusion, our mission is bold: making limitless clean energy a reality. To get there, we need a high-performing, diverse team that brings different perspectives, challenges assumptions, and builds together with purpose. We know that diversity of thought and experience leads to better ideas, stronger execution, and a more resilient team. We don’t look at how you identify, what you look like, who you choose to worship or what ethnicity you are. We care about what you can bring to the table.

Original posting on Proxima Fusion's site ↗

Listed on hirly, a job board. hirly is not the employer: Proxima Fusion is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job