hirly

Regal Rexnord

Manufacturing Engineer II

Erie, Pennsylvania, United States

hirly Pro

Get in front of the people hiring at Regal Rexnord

  • Reach the hiring manager at Regal Rexnord on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Regal Rexnord, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Regal Rexnord first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.9M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
15 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

  • Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord office.
  • ____________________

Position Overview:

The Industrial Powertrain Solutions segment of Regal Rexnord is seeking a Manufacturing Engineer at our Erie, PA location. The Manufacturing Engineer is responsible for applying engineering principles through planning and development of tools, methods, processes, and equipment that maximize quality of the final product in the most effective, efficient, and economic way possible. The position may be assigned to either Assembly or Machining operations.

Key Responsibilities:

Analyze, plan, and design layout of work area, equipment, resources, and production methods for waste reduction and maximum efficiency, with the use of Lean Manufacturing principles and processes.

  • Develop, evaluate, and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards.
  • Maintain and ensure quality of machined components and finished assemblies by identifying, evaluating, and resolving production, process, and quality problems.
  • Recommend improvements for worker efficiency and reduction of waste through striving for True North, restructuring job duties, reorganizing workflow, relocating workstations and equipment to support one-piece flow where applicable.
  • Drive, coordinate and facilitate continuous improvement projects, kaizen events and cost improvement initiatives.
  • Participate in daily WAR (walk around review) meetings on the shopfloor. Drive problem solving activities using ABS tools.
  • Prepare estimates for implementation of process improvements including labor, equipment, material costs and assembly capabilities.
  • Lead and coordinate equipment purchase, installation, or modification projects. Responsible for preparing CAPEX documents, project budget and timing.
  • Confer with vendors to determine product specifications for equipment, materials, or parts and evaluate products according to production needs and quality standards.Create and proof
  • Work closely with Design Engineering on product design changes and/or new product development to include evaluation of tooling, fixtures, workflow, and workstations. Owns and supports new product launches.
  • Design workflow, workstations, and work cells in accordance with safety, environmental and ergonomic standards.
  • Develop, maintain, and improve production routings to provide clear and necessary work instructions to production associates. Strive to improve quality and reduce product cost.
  • Provide leadership, technical support, and instruction for manufacturing personnel on new assembly and/or machining procedures.
  • Represent the Company in technical matters dealing with outside vendors and/or customers. Travel to observe new methods, trade shows or workshops, customer visits and repairs as required.
  • Assist with work measurement programs and analyzing work samples for developing standards for labor utilization.

Critical Competencies:

Demonstrated safety orientation and compliance mindset.

  • Demonstrated problem solving and critical thinking skills, including having a continuous improvement, "go and see" mindset and an advocate for driving change.
  • Highly productive with a strong sense of urgency and orientation to details, accuracy, and excellent outcomes.
  • Results-oriented with a demonstrated ability to be self-directed and self-motivated, effectively manage time and multiple priorities, and meet deliverables promptly.
  • A willingness to be flexible and adapt to changes in internal processes, delays, or unexpected events to meet daily customer demand and on-time delivery requirements, including performing any task required to meet department objectives.
  • Willingness and ability to work extended hours, including weekends as required to support manufacturing needs.
  • Demonstrated understanding of common manufacturing processes, equipment, or machinery, including strong knowledge in mechanical, electrical, and hydraulic applications.
  • Demonstrated proficiency with reading and understanding blueprints, technical drawings, schematics, and performing complex mathematical calculations (including trigonometry).
  • Strong analytical ability to recognize the need for modification of procedures or processes, identify root cause, collect data, establish facts, and draw valid conclusions where limited standardization or information exists.
  • Strong interpersonal skills which foster teamwork and collaboration and develop high quality working relationships to influence, gain support, and achieve results. This includes a strong cooperation with production, engineering, and maintenance personnel, external customers, and vendors.
  • Excellent verbal and written communication skills, including the ability to effectively deliver and transfer knowledge of technical concepts to production associates and respond to questions.
  • Demonstrated ability to maintain confidentiality and handle proprietary and sensitive information with integrity.
  • Intermediate to advanced level proficiency with CAD and MS Office software applications (Word, Excel, PowerPoint).
  • Demonstrated understanding of finance, capital appropriations, and budgeting practices and ability to perform manufacturing analysis and estimate cost of labor, equipment, material, and assembly capabilities.

Required Skills and Qualifications:

  • Bachelor’s degree in Industrial, Manufacturing, or Mechanical Engineering or another relevant engineering discipline is required.
  • 3-5+ years of Engineering experience in a fast-paced manufacturing production and/or machining environment with proven success in implementing process or product improvements is preferred but will consider candidates with less experience or recent graduates.
  • Education or training in CNC Machining, robotics, and/or test equipment
  • Willingness and ability to occasionally travel domestically to other sites, vendor and/or customer visits, and training events.

Preferred Skills and Qualifications:

  • Previous experience working with products with tolerances less than 0.0005”.
  • Experience with turning, milling, and grinding processes.
  • Experience with gear design (hobbing, skiving, and grinding).
  • Prior experience with mechanical assembly, product testing, electromechanical power transmission technology and applications.
  • Experience using advanced quality tools and/or lean manufacturing concepts.

Physical Demand and Work Environment:

Reasonable accommodations may be made to enable persons with disabilities to perform the essential functions. Potential physical demands include, but are not limited to frequent walking and standing, occasional twisting, stooping, carrying, handling, pushing, and pulling, climbing, kneeling, and lifting up to 50 lbs. Potential sensory demands include but are not limited to hearing and seeing. Majority of time is spent in a manufacturing production environment with some (but not all) climate-controlled areas. Personal protective safety equipment must be worn, and proper safety precautions must be observed. Potential exposure may include solvents, dusts, and lead.

Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a ‘U.S. Person’, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position.

Candidates must be eligible to work in the United States without requiring company sponsorship to obtain or keep U.S. work authorization.

Benefits

  • Medical, Dental, Vision and Prescription Drug Coverage
  • Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
  • Paid Time Off and Holidays
  • 401k Retirement Plan with Matching Employer Co
Original posting on Regal Rexnord's site ↗

Listed on hirly, a job board. hirly is not the employer: Regal Rexnord is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job