Manufacturing Engineer - Lunar Operations (Mid - Senior)

Application close date:

Applications will be accepted on an ongoing basis until the requisition is closed.

At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!

This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities.

We are seeking experienced Manufacturing Engineers to join our Operations team at Blue Origin. In this role, you will own the design and implementation of efficient manufacturing systems, ensure stringent quality control throughout production, and optimize supply chain logistics across advanced lunar and spacecraft hardware domains. The ideal candidate is results-driven, skilled in resource management, and committed to high-quality standards. You will collaborate with cross-functional teams—including engineering, quality, supply chain, and production—to streamline processes, reduce costs, and accelerate build timelines. Leveraging cutting-edge technologies and methodologies, you will contribute to the continuous improvement of manufacturing techniques, ensuring Blue Origin’s continued innovation and excellence in aerospace engineering.

This is a pooling requisition for current and anticipated openings across multiple Lunar teams, shifts, and locations. Candidates will be matched to the right roles as needs are identified.

Role Specific Details:

Shifts: Multiple shifts available

Location: Space Coast, FL

Relocation: Available

Potential travel: Up to 10% for training and related activities (where applicable)

Responsibilities include but are not limited to:

Support the industrialization of new flight and payload hardware (solar arrays, avionics, structures, mechanisms, integration & test, GSE, and more).

Drive application and optimization of DFM, DFA, DFT across product lifecycle.

Translate engineering requirements into robust, repeatable manufacturing and assembly processes.

Collaborate closely with design engineering, quality, supply chain, and operations to integrate products and accelerate build.

Develop and maintain clear manufacturing documentation (work instructions, inspection plans, process flows, tooling).

Evaluate/implement new manufacturing tech: composites, advanced machining, additive, metrology, materials, automation, etc.

Lead, support, and document root cause investigations and drive corrective action.

Ensure strict compliance to standards (AS9100, ISO 9001, NASA, UL, AWS, etc.).

Own or support process FMEAs, risk assessments, equipment validation, and product qualification.

Identify opportunities for process improvement and cost reduction; advocate for Lean/DFx principles.

Mentor, coach, and support the technical development of engineers and technicians.

Represent Manufacturing Engineering in program, customer, supplier, and cross-functional reviews.

Team Focus & Domain Specialties:

Blue Origin’s integrated manufacturing teams enable the development, production, and lunar deployment of groundbreaking aerospace hardware. You will work within one or more core specialty domains:

Thermal & Fluid Systems| Lunar/spacecraft radiators, heat exchangers, active/passive thermal hardware. Cryogenic and fluid/propulsion systems, oxygen handling. Pressure vessel and tank integration, qualification, and test.

Structures & Integration | Complex aerospace structures, assemblies, pressure vessels, and large-scale mechanisms. Launch vehicle GSE, tooling, and multi-axis/mechanized fabrication. Structural analysis (FEA), design, fabrication, qualification, and NDT.

Tooling & Ground Support Equipment | Design, build, test, and commissioning of flight tooling, automated assembly tooling, mechanical fixtures, lifting rigs. PLC/motion control systems for mechanized/robotic tooling. Fabrication, maintenance, and integration for flight and ground support systems.

Solar Arrays & Avionics | Space-rated solar arrays: cell processing, wing/panel build, stringing, NASA standards. Avionics/harnesses, ESD/bonding, cleanroom practices, advanced test/metrology. Special electronic equipment development and integration.

Assembly, Integration & Test | Complete vehicle/subsystem assembly & build flow sequencing. System-level integration and test: tubing, harnesses, tanks, structures, propulsion, avionics. Ground and flight hardware integration, qualification, and certification.

Minimum Qualifications

Bachelor’s in Mechanical, Manufacturing, Electrical, Aerospace Engineering, or related discipline

Relevant Manufacturing Engineering experience: (3+ years Level II Engineer, 5+ years Level III Engineer, 8+ years Level IV Engineer)

Demonstrated experience creating clear, accurate manufacturing documentation (work instructions, BOM, flow diagrams)

Ability to work required shift and site, with flexibility for extended shifts/overtime as needed

Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Preferred Qualifications

Master’s/Advanced degree in relevant engineering field

Lean Six Sigma Greenbelt, PMP, or equivalent certification

Thermal/Fluid Systems: Hardware/system-level ownership, experience with spacecraft thermal control, pressure vessel and protection systems qualification; application of NASA, ASME, AWS, UL, and similar codes.

Structures & GSE: Experience designing, building, and qualifying complex aerospace structures, pressure vessels, GSE/tooling (flight or ground support equipment), multi-axis mechanical systems, PLC/motion control.

Solar Arrays/Avionics: Experience building/testing solar arrays, harnesses, panel/wings; proficiency with NASA-STD-8739.*, ESD cleanroom practices, electronics systems, advanced test methods; familiarity with safety-critical hardware.

Assembly, Integration & Test: Complex vehicle integration, subsystem troubleshooting, NPI, production transition, qualification, and certification.

Proficiency in one or more: NX, CATIA, Creo, SolidWorks, Teamcenter, Windchill, PLM/MRP/BOM management

Experience with advanced metrology (CMM, laser scanning), manufacturing automation, digital work instructions

Experience with analytical evaluation (DFM, DFA, FEA, tolerance/FMEA, NDT [visual, dye pen, ultrasound, X-ray, CT, EC, XRF])

Direct project ownership, technical leadership, and mentorship of engineering/operations teams

Experience leading cross-functional initiatives in new product development, design-to-production transition, or DFx advocacy

Exceptional communication skills; ability to represent manufacturing engineering expertise in cross-site teams, customer/supplier interfaces, and technical reviews

A record of mission assurance, world-class quality, and continuous improvement

Culture Statement

Don’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.

Export Control Regulations

Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Background Check

Required for all positions: Blue’s Standard Backgroun