hirly

Northrop Grumman

Mechanical Engineer/ Lvl 3/4– Motion Control and Avionics (Technical)

United States-Maryland-Elkton

hirly Pro

Get in front of the people hiring at Northrop Grumman

  • Reach the hiring manager at Northrop Grumman on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Northrop Grumman, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Northrop Grumman first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
3 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

RELOCATION ASSISTANCE: Relocation assistance may be available

CLEARANCE REQUIRED FOR START: No

CLEARANCE TYPE: Secret

TRAVEL: Yes, 25% of the Time

Description

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

Northrop Grumman is currently seeking a Principal Propulsion Engineer or Sr. Principal Propulsion Engineer to join our team at our Elkton, Maryland location to support the Propulsion Systems and Controls (PS&C) business unit.

Northrop Grumman Propulsion Systems and Controls (PS&C) facility in Elkton, Maryland began solid‑propellant rocket operations in 1948. Today, the Elkton PS&C facility designs, develops, and produces solid‑propellant propulsion, ordnance and motion controls systems in programs professionally managed for a wide variety of Government and commercial customers. The facility also serves as the hub for offsite engineering and test facilities in Ronkonkoma, NY and Palm Beach Gardens, FL.

Elkton, Maryland is located on the Upper Chesapeake Bay, midway between Philadelphia and Baltimore. Discover charming small towns, parks with miles of trails, specialty and antique shops, award‑winning restaurants, and inns. You can hike, bike, camp, bird watch, ride horseback, or drop a fishing line. Five rivers, Chesapeake Bay and the C&D Canal can be explored by boat or by land. Experience panoramic views from Turkey Point Lighthouse on a bluff overlooking the Bay, or from the banks of the C&D Canal where ships from around the globe cruise. https://www.ccgov.org/government/tourism

Overview

We are seeking a Principal or Sr. Principal Mechanical Engineer to lead detailed design and development of actuation and motion control hardware within our Propulsion Systems & Control (PS&C) business unit. This role sits on the Motion Controls team, which develops high‑reliability, high‑capability systems such as:

  • Rocket motor nozzle vectoring mechanisms and controls
  • Flight surface actuators
  • Cold and hot gas valve / thruster actuation
  • Other critical motion control systems for space and defense applications

You will be the mechanical design lead or a key member of the design team – using CAD, analysis, standard work, and a fair amount of ingenuity to create robust, producible actuation hardware that meets demanding performance, cost, and schedule requirements. This role has a strong emphasis on electric motor and gearbox integration, thermal performance, and close collaboration with electrical engineering.

Key Responsibilities

Mechanical Design & Analysis (Primary)

  • Own the mechanical design of actuators, mechanisms, and motion control hardware from concept through detailed design, release, and test.
  • Develop, iterate, and maintain 3D CAD models and drawings (Siemens NX), including GD&T, materials selection, and manufacturing details.
  • Perform or lead mechanical analyses (stress, kinematics, thermal, life/fatigue, margins) and document assumptions, methods, and results clearly.
  • Analyze and size mechanical components based on motor torque/speed curves, gearbox ratios, duty cycles, and thermal limits to ensure adequate margin and reliability.
  • Use test data and analysis to refine designs for motor mounting, gear trains, bearings, thermal paths, and structural interfaces.
  • Apply and improve standard work and design guidelines to drive effective, repeatable, and manufacturable designs while still solving novel problems with engineering judgment and creativity.
  • Support prototype builds, development testing, and qualification testing, and drive design closure based on measured performance.

Integration with Electrical, Systems, Motors, and Gearboxes

  • Work closely with electrical engineers to ensure MCAD/ECAD integration is correct – connector placement, clearances, harness routing, boards in housings, stack‑ups, and thermal/EMI constraints.
  • Collaborate with motor and controls engineers to define motor/gearbox requirements and ensure that mechanical designs support electrical performance, control bandwidth, and environmental requirements.
  • Review system‑level requirements and work through them with systems engineers; help decompose them into clear mechanical requirements and verification plans.
  • Coordinate modeling details and configuration across mechanical, electrical, and systems models to keep the overall design coherent.
  • Understand and consider electric motor and gearbox design and behavior (torque, speed, thermal performance, duty cycles, efficiencies, margins) when defining mechanical interfaces and sizing components.

Failure Analysis, Non‑Conformances, and RCCA

  • Lead or support component‑level failure analyses, FMEA, and FMECA for mechanical and electromechanical hardware.
  • Drive root‑cause and corrective action (RCCA) activities when issues arise in test, production, or field use, including data gathering, hypothesis testing, and corrective/preventive actions.
  • Work non‑conformances through to closure: evaluate impact, define dispositions, update drawings/requirements, and feed lessons learned back into standard work.

Execution, Risk, and Quality (Mechanical Scope)

  • Develop scope, objectives, and deliverables for mechanical work packages in collaboration with the project engineer and broader team.
  • Track progress for your mechanical scope against schedule, budget, and technical milestones; raise issues early and propose technical options.
  • Identify and manage technical risks related to mechanical design (including motor/gearbox integration and thermal performance); maintain risk entries and contingency plans for your hardware.
  • Ensure quality standards are met via design reviews, peer reviews, appropriate test coverage, and disciplined configuration management.

Cross‑Functional Collaboration

  • Coordinate with procurement, suppliers, and manufacturing engineers to ensure hardware and materials are specified correctly, manufacturable, and delivered on time.
  • Support build, integration, and test activities, providing on‑the‑floor guidance when needed to resolve mechanical issues quickly.
  • Recommend improvements to design practices, tools, and processes to increase reliability, cycle time, and team effectiveness.

Basic Qualifications – Principal Mechanical Engineer (Level 3)

  • Bachelor’s degree in Engineering and 5+ years of relevant experience; OR
  • Master’s degree in Engineering and 3+ years of relevant experience; OR
  • PhD in Engineering and 1+ year of relevant experience
  • Ability to obtain a Secret Clearance (U.S. Citizenship required)
  • Ability and willingness to travel as required (10–25%)

Basic Qualifications – Sr. Principal Mechanical Engineer (Level 4)

  • Bachelor’s degree in Engineering and 8+ years of relevant experience; OR
  • Master’s degree in Engineering and 6+ years of relevant experience; OR
  • PhD in Engineering and 4+ years of relevant experience
  • Ability to obtain a Secret Clearance (U.S. Citizenship required)
  • Ability and willingness to travel as required (10–25%)

(Level will be based on experience, education, and demonstrated competency.)

Preferred Qualifications (Both Levels)

  • Demonstrated leadership of mechanical design for complex electro‑mechanical systems (actuators, mechanisms, motion control hardware).
  • Strong experie
Original posting on Northrop Grumman's site ↗

Listed on hirly, a job board. hirly is not the employer: Northrop Grumman is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job