ON.energy
Principal Power Electronics Engineer
Houston, Texas, United States · Miami, Florida, United States · Reston, Virginia, United States
hirly Pro
Get in front of the people hiring at ON.energy
- Reach the hiring manager at ON.energy on LinkedIn, from your own account
- hirly applies to this job for you, with unlimited applications
- A resume and cover letter written for this job, unlimited
- The hiring manager and recruiter at ON.energy, with contact details
$49 a month · ₹1,999 for 30 days in India · cancel any time
Get past the screening software and onto a recruiter's desk
hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.
- Keywords matched to this posting
- Fit score before you apply
- Cover letter included
Matched against 2.2M live jobs from 220,000+ employers in 200+ countries.
Tailor my resume for this job →Apply from your AI assistant
Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.
Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.
hirly's read of this role
- Seniority
- Lead / management
- Country
- US
- Work mode
- On-site / unstated
- First seen by hirly
- 18 Nov 2026
Derived automatically from the posting. Upload your resume above to see how the role scores against it.
the posting
ON.energy is setting the standard for large load interconnection. ON’s patented AI UPS™ is a medium-voltage UPS that serves as a firewall, protecting the data center from the grid, and the grid from the data center. With multiple gigawatts currently under construction, we are enabling grid-safe data centers.
We are hiring a Power Electronics Engineer to own the power conversion system (PCS) in our product, both how it is designed and how it behaves. This is a product-focused role. You will lead PCS product design and documentation, tune inverter controls, lead lab and field testing, and prove ride-through and fault compliance in GFL and GFM modes.
You will work closely with our PCS suppliers' controls teams and with our business development, project, commissioning and O&M engineering teams. You will report to the Senior Power Electronics Manager.
What You Will Do
Controls, testing and grid compliance
Own inverter control settings. Define, tune and maintain the control and protection parameters for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop and virtual impedance, current limiting and overload, and ride-through curves. Maintain a controlled settings baseline per project and per firmware release.
Lead system testing. Plan and run grid-integration test campaigns at national-lab and third-party facilities, as well as factory (FAT) and site tests. Write test procedures, analyze waveforms and issue reports.
Prove grid-code compliance. Demonstrate that the system meets LVRT/HVRT, frequency ride-through, phase-jump, fault-current and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741 and ERCOT rules, for both the grid-side GFL converter and the load-side GFM converter.
Analyze fault and weak-grid behavior. Study 3-phase and unbalanced faults, low-SCR operation, paralleled-converter interaction and circulating currents. Recommend control or setting changes and verify them in test.
Support simulation and HIL studies. Work with our modeling team (PSCAD, OPAL-RT, Typhoon HIL) to define study and HIL test cases, supply settings and test data, review reports, and confirm results match field and lab behavior.
Product and project engineering
Lead PCS product design. Recommend design approaches and main-equipment vendors, and participate in product design sprints with the development team.
Serve as technical lead with PCS suppliers. Review firmware releases and change logs, specify required behavior, and qualify new or second-source inverters against a common test set.
Support business development. Prepare technical proposals, including single-line diagrams (SLDs) and general arrangements (GAs) tailored to customer needs.
Support project execution. Compile technical information packages for project engineering, co-lead review and validation of PCS topics, and maintain technical documentation, including as-built drawings.
Support commissioning and O&M. Participate in commissioning, resolve field events from the waveform up, and feed design improvements back into the product.
Required Qualifications
Bachelor's degree in Electrical Engineering, Power Electronics Engineering or a similar field (MS or PhD a plus)
8+ years of hands-on power electronics engineering in project-based or industrial settings
Proven system-level design experience on MW-scale power electronics equipment
Understanding of how BESS integrates with power electronics equipment
Hands-on control design or tuning of three-phase grid-connected inverters: dq current control, PLL and synchronization, and DC-link control
Working knowledge of grid-forming control (droop, VSG, virtual impedance) and how GFM current limiting differs from GFL
Direct experience with ride-through and fault behavior of inverter-based resources (LVRT/HVRT, reactive current injection, negative-sequence response) and the grid codes that govern them
Ability to read and critically review PSCAD/EMT study reports and HIL (OPAL-RT, Typhoon) results, and compare them with measured test data
Experience planning and running tests on MW-scale inverters or BESS: lab, FAT or site commissioning
Ability to produce and read SLDs and GA drawings
Strong waveform and data analysis skills using Python, MATLAB or similar
Excellent communication across technical and non-technical teams, with clear technical writing for test procedures, reports and settings rationale
Preferred Qualifications
Experience with BESS, UPS / mission-critical or utility-scale infrastructure projects, including IEC 62040-3 performance classes
Paralleled converters on common AC and DC buses: load sharing, zero-sequence and circulating-current control, interleaving
Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods
Grid-integration testing at a national lab or accredited facility
Hands-on use of PSCAD, MATLAB/Simulink or real-time simulation (RTDS, OPAL-RT, Typhoon HIL)
ERCOT interconnection experience (NOGRR 245 / 282, large-load ride-through)
Experience working with an inverter OEM's firmware and parameter sets as the customer, not only as the designer
AutoCAD and protection settings coordination
Tools and Standards You Will Work With
Simulation: PSCAD/EMTDC and PSS/E study reports; OPAL-RT and Typhoon HIL results
Test and analysis: Power analyzers, high-speed DAQ, scopes, Python/MATLAB
Grid codes: IEEE 2800, IEEE 1547 / UL 1741 SB, ERCOT Nodal Operating Guides, NERC reliability guidelines
UPS: IEC 62040-3
Equipment: MW-scale liquid-cooled PCS, 1.5 kV DC battery systems, MV transformers
For US-based roles - What you’ll get:
Competitive salary + annual performance-based bonus eligibility
Medical, dental, and vision insurance
401(k) with company match
Paid time off and company holidays
For Mexico-based roles - What you’ll get:
Competitive salary + annual performance bonus eligibility
Christmas Bonus (Aguinaldo): 30 days
Major medical expenses and life insurance
Paid time off and holidays (per local policy)
For all roles:
Professional development and growth opportunities
Opportunity to grow with a mission-driven team shaping the future of clean energy
Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation.
Benefits vary by role and location and are subject to change.
Agency Notice: ON.energy does not accept unsolicited resumes from staffing agencies, search firms, or third-party recruiters. Resumes submitted without a fully executed Master Services Agreement (MSA) and a written request from an authorized member of our Talent Acquisition team will be considered the property of ON.energy. No placement fees or compensation will be paid for unsolicited candidate submissions.
Listed on hirly, a job board. hirly is not the employer: ON.energy is hiring for this role.
Similar jobs
- Lead Power Electronics Engineer Whisperaero · Nashville, Tennessee, United StatesFirst seen yesterdayremote
- Staff Power Electronics EngineerKarman Industries · Los AngelesFirst seen 12d ago
- Pathways Recent Graduate Electronics EngineerAgriculture, Rural Development · Fort Collins, Colorado, United StatesFirst seen today
- Senior RF Electronics EngineerMuonspace · San Jose, CAFirst seen yesterdayremote
- Supervisory Electronics EngineerSmithsonian Institution · Hilo, Hawaii, United StatesFirst seen yesterday
Browse similar roles
Want this one?
Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.
Tailor my resume for this job