hirly

queueinc

Senior Edge Engineer

HQ - Newark, CA

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at queueinc first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included
Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending. ChatGPT: manual setup today.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Senior
Country
US
Work mode
On-site / unstated
First seen by hirly
9 Oct 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

About Us

Queue builds robots to fill prescriptions. Our machine is designed to take stock bottles of medication and produce counted, labeled vials, so that pharmacists and technicians can spend their time on patients. Our first product is built to work behind the pharmacy counter and to be operated by pharmacy staff.

About the Role

We are building out the Edge squad: the engineers who write the software that runs on our machine and tells its hardware what to do. You own hard parts of that software end to end, from the links to the boards to the way a new version reaches a machine in the field and behaves there. On every path you own you build to one rule: when the machine cannot confirm a step, it stops safely and says why.

This is a senior-level role.

What You'll Own

Hardware links — The edge software's side of the links to the motor board and the other controllers, over CAN, serial, USB and Ethernet: framing, timing, errors, reconnects and the tests that prove them. You set how they are built and tested.

Fill sequencing — The state machines that take a fill from the moment it reaches the machine to the moment the machine finishes or stops. You set how they are designed and tested.

Contracts at the boundaries — The contracts with the microcontrollers and the vision service. You version them and change them with the firmware and vision engineers, so that old and new versions work together through a release.

What the software needs from the image — The services, devices, bus settings and packages the edge software needs from the machine's Linux image. You make those changes with the engineers who own the image.

Field behavior — What the edge software reports from a machine in the field, how it is diagnosed from a distance, and its part in how a new version arrives and how it is rolled back if it fails. You build it with the platform and systems reliability engineers.

Fail-closed behavior — The rule on every path you own: when the machine cannot confirm a step, it stops safely and says why. You design the failure path first and prove it on the bench.

First 90 Days

Day 30: You have built the edge software, run it against the boards on a bench, and merged changes through review. You can trace a fill through the state machines and name each point where it has to stop if a step cannot be confirmed.

Day 60: You own a hardware link and its contract end to end. You have made a change to the machine's Linux image with the engineers who own it, and run it on a bench machine.

Day 90: You have taken a change from design through a release to a machine on the bench, with its failure paths tested first. You hold a written plan for what the edge software reports from the field and how it is diagnosed from a distance.

What We're Looking For

Must-Have

Ownership — you have written production C, C++ or Rust on Linux and owned what you shipped, from the first design to the fault found in the field.

Hardware integration over buses — CAN, RS-485 and other serial links, USB. You have debugged a link with an analyzer on the wire when the logs and the hardware disagreed.

Real-time orchestration and state machines — you have sequenced motion, sensing and I/O where partial failure is normal, and you design the failure path first: when a step cannot be confirmed, the system stops safely and says why.

MCU boundary literacy — you understand how a microcontroller runs and what it exposes to a Linux host, and you have kept versioned device protocols with firmware working through change, for example a protobuf schema, a CAN message set or a register map.

Embedded Linux integration — you have done substantial work getting software running well on an embedded Linux system: its services, devices, start-up, configuration and updates, worked out with the owners of its image.

Connected device fleets — you have run devices in the field: updates, remote diagnostics, telemetry, and the recovery of a unit you cannot touch.

The edge software is written in Rust, and you will work in it every day. Rust in production is preferred.

Nice-to-Have

Industrial x86 and ARM platforms in a shipped product.

Full ownership of an embedded Linux distribution: building and maintaining the image of a shipped device, from what goes into it to how it updates.

Kernel and board bring-up: drivers, device trees and boot on a new board.

Hardened device platforms: verified start-up, signed updates, a read-only system and device identity.

NVIDIA Jetson: JetPack and Linux for Tegra, secure boot, field updates and the inference stack.

Robotics, medical devices, automotive or industrial automation.

How We Hire

Recruiter Screen (30 min)

Technical Interview (90 min) — a take-home exercise of 2 to 3 hours, in C, C++ or Rust, sent at least 24 hours before: a small piece of device software built around a state machine, which has to stay correct when power is lost at any step. We go through it together, then build on it.

Design Interview (60 min) — the path a new version of the software takes to a fleet of machines, with the failure cases in from the start.

Leadership Interview (60 min) — how you own your work and work across squads.

Two interviewers score each technical stage independently.

What We Offer

Ownership — hard parts of the edge software end to end, from the links to the boards to machines in the field

Hard problems: real-time sequencing across boards, contracts with firmware and vision, and machines in the field you cannot touch

Small team, zero bureaucracy, high trust

Why Join Us Now?

Impact & Growth

Direct Impact: The code you write tells the machine's hardware what to do, on the bench and in the field

Growth: The work runs from one hardware link to how the software behaves on every machine in the field

Team and Culture

Reports to the Head of Software Engineering with significant autonomy and influence

Who You Work With: You work every day with the engineers who build the edge software, and closely with the firmware, vision, platform and systems reliability engineers

Where We Work: Hybrid, three days a week at our headquarters in the Bay Area; the bench work needs the hardware in front of you

Our Values

Servant Leadership

Do the Hard Things

Own Your Work

Default is Now

Own Your Work comes first in this role: what you ship to a machine is yours until it works there.

Contact: If you have any questions, please contact us at [email protected]

Original posting on queueinc's site ↗

Listed on hirly, a job board. hirly is not the employer: queueinc is hiring for this role.

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job