hirly

Voyant Photonics

Senior / Principal Silicon Photonic Packaging & Process Engineer

New York Office (HQ)

hirly Pro

Get in front of the people hiring at Voyant Photonics

  • Reach the hiring manager at Voyant Photonics on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Voyant Photonics, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Voyant Photonics first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.9M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Lead / management
Stated salary
$150,000 – $250,000 per year
Country
US
Work mode
On-site / unstated
First seen by hirly
11 Sept 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Silicon Photonic Packaging & Process Engineer

About Voyant Photonics

Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system.

Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. With Voyant, the next generation of machines can see, understand, and navigate the world like never before.

Discover how we’re redefining what’s possible by making real products out of cutting-edge research in silicon photonics.

The Opportunity:

As a Principal Silicon Photonic Packaging & Process Engineer, you will lead the development and scaling of precision opto-mechanical assembly processes. You will work closely with photonics, mechanical, and test teams to translate design concepts into R&D builds then into repeatable production processes. You will also partner with our contract manufacturers to qualify lines, improve yields, and drive continuous process improvements.

This is a unique opportunity to take ownership of critical opto-mechanical and electronic assembly processes that define the precision, yield, and quality of Voyant’s LiDAR modules. You will establish new package designs focused on robust, high-yield manufacturing processes, optimize production at our global contract manufacturers, and help scale complex, high-precision processes from R&D to high-volume production. Your work will directly impact Voyant products, accelerating time-to-market, reducing cost, and ensuring consistent product quality across global manufacturing sites.

This position requires willingness to travel up to 25% domestically and internationally, both within the United States and internationally (primarily Europe and Asia), to support process transfer, line qualification, and build execution at our manufacturing partners.

Key Responsibilities

Package Design:

Familiarity with various packaging technologies including organic and ceramic substrates. Wafer level packaging and 2.5D/3D assembly processes as well as those listed below. Identifying and initiating business with substrate suppliers and assembly houses. Working through the design process mechanically, thermally and electrically to create the optimal solution while staying within supplier manufacturing capabilities. Creating CAD models for simulation and performing simulations to verify designs prior to release.

Precision Lens Assembly:

Own process definition and control for automated microlens alignment and bonding. Program motion sequences, optimize camera and vision-based routines, and tune process parameters (alignment offsets, bonding dwell, UV cure profiles, placement forces) to achieve sub-micron accuracy and high yield.

Die Placement Process Ownership:

Define and maintain process parameters for high-precision die-attach and placement equipment. Drive correlation between pick-and-place accuracy, epoxy flow, and bond-line thickness for consistent optical coupling.

Epoxy and Adhesive Dispense Control:

Establish and control parameters for automated dispense systems. Develop dispense recipes controlling needle diameter, pressure, time, temperature, and material conditioning. Characterize cure profiles and shrinkage impacts on optical alignment stability.

Yield and DOE Execution:

Design and execute structured DOEs to characterize process sensitivity and optimize yield. Use statistical methods to quantify variability and identify dominant factors affecting alignment accuracy, void formation, or optical loss.

Reliability and Qualification:

Familiarity with microelectronics and photonics reliability and qualification standards such as Telecordia, JESD47 and AEC-Q. Also able to lead Root Cause Corrective Actions (RCCAs) with suppliers, Design and Process FMEA’s and DOE planning.

Measurement and GR&R:

Define measurement methods and run GR&R studies on critical parameters (e.g., placement accuracy, epoxy volume, bond-line thickness). Ensure metrology tools and data systems at the CM are calibrated and controlled.

Factory Execution and Scale-Up:

Lead the implementation of robotics, automation, and material handling solutions by partnering with automation suppliers and contract manufacturers to enable scalable, high-throughput production. Drive failure analysis (FA) and corrective actions (CA) on process-related issues, and continuously improve yield, throughput, and takt time. Partner with the contract manufacturer to qualify processes, train operators, and own line readiness for precision optical assembly builds.

Qualifications:

BS or MS in Mechanical, Manufacturing, Photonics, or Electrical Engineering (or equivalent experience)

10+ years hands-on experience in semiconductor, photonics packaging, or precision opto-mechanical assembly environments

CAD modeling and simulation, SolidWorks preferred experience

Deep familiarity with automated alignment and die-attach systems

Strong understanding of adhesive dispense physics (viscosity, wetting, cure shrinkage) and related automation equipment

Proficiency with DOE methods, SPC, and Minitab (or equivalent tools)

Demonstrated experience working with automation solution providers and contract manufacturers to transfer and adapt prototype processes into high-volume production

Excellent problem-solving skills and ability to collaborate across mechanical, optical, and test teams

Willingness to travel up to 25% domestically and internationally

Preferred Qualifications:

Experience with automated micro-optics or fiber alignment processes

Experience in standard optics alignment and assembly for lens-to-PIC coupling

Familiarity with standard micro-electronic assembly (die attach, wire bond, hermetic lid seal, PCBA/SMT)

Understanding of cleanroom protocols and ESD control best practices

Familiarity with ISO 9001 process control or automotive-style production quality systems

Understanding of photonic packaging materials (epoxies, UV adhesives, underfills) and their environmental stability

Background in precision metrology systems (e.g., digital microscopes, interferometers, or confocal profilers)

Experience with Finite Element Analysis for both mechanical and thermal simulations

Equal Opportunity Employer

Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Original posting on Voyant Photonics's site ↗

Listed on hirly, a job board. hirly is not the employer: Voyant Photonics is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job