Senior RF/DSP Engineer

Worker Type

• Regular
• Job Description

AV is seeking a hands-on Senior RF/DSP Engineer to expand the RF detection and classification capabilities of our Counter-UAS products.

The Senior RF/DSP Engineer will investigate unfamiliar drone command, control, and telemetry links and turn incomplete RF evidence into reliable production capabilities. A typical assignment may begin with a newly encountered drone/controller pair, a collection of complex-IQ recordings, and technical guidance on approach and priorities from senior signal-processing staff. The engineer will characterize the waveform, design controlled experiments, determine which signal and protocol features can support detection or identification, implement the solution in C++, and validate its performance against real-world RF data — carrying the assignment from guided starting point to production-quality result.

This is an individual-contributor engineering role. The successful candidate will personally analyze signals, develop algorithms, write and debug production code, design experiments, and support laboratory and field validation. It is not primarily a project-management, vendor-management, or advisory position.

Prior experience with every waveform or protocol we encounter is neither expected nor possible. We are looking for an engineer with strong fundamentals who can learn unfamiliar systems, form testable hypotheses, and make defensible conclusions from imperfect data.

What You'll Do:

• •Analyze wideband complex-IQ recordings from known and unfamiliar RF systems.
• •Characterize signal bandwidth, timing, modulation, synchronization, channel access, frequency-hopping behavior, framing, coding, and other observable properties.
• •Design controlled experiments that isolate transmitter behavior and reveal waveform or protocol structure.
• •Develop algorithms for burst detection, synchronization, demodulation, signal characterization, protocol recovery, classification, and tracking.
• •Distinguish target signals from noise, interference, receiver artifacts, and benign emitters in dense RF environments.
• •Implement and optimize production DSP capabilities in modern C++.
• •Use MATLAB, Python, or similar tools for exploration, simulation, visualization, and algorithm prototyping.
• •Convert exploratory analysis into maintainable, observable, and computationally bounded production components, following the team's established architecture and methodology.
• •Build synthetic waveforms, replay fixtures, and automated tests using the team's frameworks.
• •Validate algorithms using synthetic, conducted, over-the-air, and field-recorded data.
• •Measure detection probability, false-alarm rate, packet error rate, acquisition behavior, latency, and computational performance.
• •Diagnose failures involving CFO, sample-clock error, timing recovery, multipath, clipping, IQ imbalance, spectral inversion, dropped samples, and interference.
• •Work with RF, FPGA, embedded software, data science, test, and mission teams.
• •Document observations, assumptions, confidence levels, known limitations, and recommended next experiments.
• •Participate in technical reviews and incorporate feedback from senior signal-processing staff.

Required Qualifications:

• •BS or higher in Electrical Engineering, Computer Engineering, Applied Physics, or a related technical field.
• •Substantial professional experience developing RF, communications, radar, electronic-warfare, or related signal-processing systems.
• •Strong DSP and digital-communications fundamentals, including several of the following: Sampling and aliasing; Digital down conversion; FIR/IIR and multirate filtering; FFT and time-frequency analysis; Matched filtering; Detection and estimation; Carrier, phase, symbol-timing, and frame synchronization; Modulation and demodulation; Channel coding and error detection.
• •Demonstrated ability to investigate an unfamiliar signal or system using measurements and controlled experiments.
• •Experience analyzing real complex-IQ data—not only simulations or high-level system models.
• •Hands-on experience implementing, testing, and debugging DSP algorithms.
• •Proficiency writing production-quality C++ in a Linux environment.
• •Experience creating automated tests and replaying recorded data through algorithm pipelines.
• •Experience with collaborative source control and code review using Git or an equivalent system.
• •US Citizenship is required.

Preferred Qualifications:

• •Exposure to reverse-engineering undocumented or partially documented wireless waveforms and protocols.
• •Experience with Software Defined Radios, RF laboratory equipment, and conducted or over-the-air testing.
• •Experience with frequency-hopping, spread-spectrum, OFDM, cellular, telemetry, command-and-control, or other modern communication systems.
• •Experience building detectors that operate in congested RF environments with measurable false-alarm requirements.
• •Experience with FPGA-based DSP, fixed-point implementation, hardware/software partitioning, or high-rate sample transport.
• •Experience optimizing real-time C++ DSP pipelines using profiling, SIMD, threading, bounded queues, and reusable buffers.
• •Experience generating synthetic waveforms and injecting controlled impairments such as noise, CFO, clock offset, fading, and interference.
• •Familiarity with direction finding, antenna arrays, phased-array processing, or emitter geolocation.
• •Familiarity with statistical classification or machine learning applied to RF data.
• •Experience with Counter-UAS, electronic warfare, SIGINT, radar, or related mission systems.

During the first several months, a successful engineer will be able to:

• •Take ownership of an assigned RF target, with technical guidance on approach and priorities.
• •Establish a reproducible dataset and analysis baseline using the team's methodology.
• •Separate verified observations from unresolved hypotheses.
• •Propose the next experiments needed to reduce uncertainty, and refine them through technical review.
• •Demonstrate an initial detector, demodulator, or protocol feature against recorded IQ.
• •Implement the capability in the production C++ architecture.
• •Add positive, negative, and regression tests.
• •Quantify performance and communicate known limitations.
• •Support validation against additional devices, environments, and RF conditions.

The strongest candidate may come from communications, SDR, FPGA, radar, telemetry, electronic warfare, or protocol-analysis work. Exact domain overlap matters less than demonstrated ability to:

1. Learn an unfamiliar signal from first principles.

2. Design experiments rather than guess.

3. Work directly with imperfect real-world data.

4. Turn analysis into reliable production code.

5. Validate claims quantitatively.

6. Remain hands-on through integration and field testing.

Clearance Level

No Clearance

The salary range for this role is:

$128,000 - $195,250

AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills.

ITAR Requirement:

This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment’s determination that it will be able to obtain an export license in a time frame consistent with AeroVironment’s business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful pe