hirly

Rhoda AI

Senior Sensor Validation & Integration Engineer

Sunnyvale, CA

hirly Pro

Get in front of the people hiring at Rhoda AI

  • Reach the hiring manager at Rhoda AI on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Rhoda AI, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Rhoda AI first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.3M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Senior
Country
US
Work mode
On-site / unstated
First seen by hirly
22 Nov 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

At Rhoda AI, we’re building the next generation of generalist intelligent robots. We own the full robotics stack from high-performance hardware and robot systems to the infrastructure and state-of-the-art foundation world models that control our robots. Our robots are designed to be generalists capable of operating in complex, real-world environments and handling long-tail edge cases, made possible by our cutting edge research and end-to-end system design. We've raised over $450M and are investing aggressively in model research, infrastructure, hardware development, and manufacturing scale-up to make generalist robotics a reality.

You’ll own how our sensors perform once they’re on the robot. That means testing LiDAR, time-of-flight, thermal and camera sensors as installed, behind windows and cladding, on a robot that moves, vibrates and heats up; finding whether a problem comes from the integration or the sensor itself; and validating sensors at module and system level in the conditions our robots meet in real warehouses. This is a senior, hands-on role with real ownership: your findings drive sensor, mounting and algorithm decisions. It does not involve writing production software.

What You’ll Do

Installed performance: Test sensors as integrated on the robot, from first bring-up on prototype robots and bench tests to on-robot validation, including full data collections; measure how windows, cladding, mounting, vibration, heat and electrical noise change range, accuracy and noise.

Root cause: Triage problems as integration issues or sensor limits, route them to the right owner with the data, and feed what you learn into the long-term sensing roadmap

Calibration: Verify sensor calibration as installed (intrinsics, extrinsics, drift over time and temperature), build the lab extrinsic calibration setup and scripts with the validation team, and feed the results into calibration requirements

Failure modes: Find where each sensor degrades or fails in real environments (lighting extremes, reflective and transparent surfaces, dust, heat sources) and how to detect it

Test design: Write module- and system-level test plans with numerical pass/fail criteria tied to perception requirements

Test environments: Build realistic, repeatable test setups, targets and scenes with our technicians

Validation: Run validation campaigns for new hardware builds (EVT, DVT) and software releases, keep the sensor test report current, and work with the safety team when sensor output drives a safety behavior

Automation: Automate test runs, data capture and analysis, including hardware-in-the-loop (HIL) setups, so validation reruns quickly whenever hardware or software changes; keep every result traceable from data to requirement, with dashboards that show regressions and how each phase closes the gap to requirements

Manufacturing transfer: Transfer sensor test methods to our manufacturing partners: define the end-of-line tests, pass/fail limits and reports they run

What We’re Looking For

5+ years of hands-on sensor bring-up, integration, calibration and testing of LiDAR, time-of-flight, thermal or camera sensors, preferably on robots, cars or similar multi-sensor platforms

BS or MS in Optics, Electrical Engineering, Physics or Mechanical Engineering, or equivalent experience

Track record of root-causing sensing problems on real hardware and telling integration issues from sensor limits

Deep understanding of optical sensing physics and limits: dynamic range, multipath, reflectance, stray light, thermal effects

Has calibrated cameras, LiDAR or depth sensors, including fixtures, targets, unit-to-unit variation and test repeatability

Has planned and run sensor test campaigns end to end, building the fixtures, targets and scenes, and validated sensor performance against requirements at module and multi-sensor system level

Has built automated test and analysis pipelines in Python, and dashboards that trace results to requirements

Has defined sensor test methods or end-of-line checks that a manufacturing partner or factory ran

Nice to Have

CAD and tolerance analysis for sensor mounting

Optical modeling or sensor simulation

Safety sensing standards such as IEC 61496, IEC 62998 or ISO 13849

ROS 2 and recorded-data tools

Laser safety (LiDAR and time-of-flight)

Original posting on Rhoda AI's site ↗

Listed on hirly, a job board. hirly is not the employer: Rhoda AI is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job