NEURA Robotics
Sensor Hardware Engineer – Tactile, Audio & Vision (human)
Munich / Freising
hirly Pro
Get in front of the people hiring at NEURA Robotics
- Reach the hiring manager at NEURA Robotics on LinkedIn, from your own account
- hirly applies to this job for you, with unlimited applications
- A resume and cover letter written for this job, unlimited
- The hiring manager and recruiter at NEURA Robotics, with contact details
$49 a month · ₹1,999 for 30 days in India · cancel any time
Get past the screening software and onto a recruiter's desk
hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.
- Keywords matched to this posting
- Fit score before you apply
- Cover letter included
Matched against 2.2M live jobs from 220,000+ employers in 200+ countries.
Tailor my resume for this job →Apply from your AI assistant
Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.
Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.
hirly's read of this role
- Seniority
- Mid level
- Country
- DE
- Work mode
- On-site / unstated
- First seen by hirly
- 18 Nov 2026
Derived automatically from the posting. Upload your resume above to see how the role scores against it.
the posting
You own the sensing stack, from first signal to production release. NEURA Robotics builds robots that have to feel, hear and see. A large part of that sits in the humanoid hand: tactile sensing in fingertips and palm, force and torque in the joints, all in a space that leaves no room for a comfortable design. Around it come microphone arrays for speech and acoustic events, and camera and depth modules that survive vibration, heat and tight packaging. You take these sensors from concept to a characterized, calibrated, production-released design, together with our electronics, firmware, perception and mechanical engineers.
Your mission & challenges
Sensor architecture: You select, specify and benchmark tactile, acoustic and optical sensors against what the robot actually needs: resolution, noise floor, latency, power, cost and supply risk.
Tactile and force sensing for the hand: You design and integrate tactile arrays and force/torque sensing for fingertips, palm and joints, including the low-noise analog front-ends behind them. You make sure they fit, mechanically and thermally.
Characterization and calibration: You run the measurement campaigns, build the fixtures, and turn your lab procedure into something production can repeat on every unit.
Bring-up and debugging: You lead sensor bring-up in the lab and trace problems end-to-end, from a noisy supply rail through the front-end to a perception result that looks wrong.
Hardware design and transfer to production: You design or co-design the sensor PCBAs and flex assemblies (depending on the product, both happen here). You own the manufacturing documentation and work with EMS partners and sensor vendors to release them for series production.
Firmware and perception interface: Firmware development is not your main job, but you can read it, write enough of it to bring a sensor up, and support the firmware team on drivers, timestamping and synchronization. With perception, you agree on what the data has to look like for their models to work.
What we can look forward to
You know sensors inside out, and you trust measurements over datasheets. You are hands-on, as comfortable with an analog front-end schematic as with a measurement setup, and you treat characterization and calibration as part of the design.
Education: Degree in Electrical Engineering, Electronics, Mechatronics, Physics or a comparable field.
Experience: 3+ years with sensor hardware, with ownership from concept through characterization to production release.
Analog & mixed-signal design: Low-noise front-end design with instrumentation and charge amplifiers, capacitive and bridge conditioning, ADC selection, grounding and shielding.
Modalities: Hands-on experience with at least two of the three modalities (tactile/force, audio, vision/depth), and the willingness to own all three.
Sensor interfaces & timing: I²S/TDM/PDM, MIPI CSI-2, SPI, I²C, and synchronization across sensors.
Measurement in practice: You design the experiment, build the fixture, and know a real effect from a measurement artifact.
PCB & flex design: Working knowledge of Altium Designer or comparable tools for compact sensor assemblies.
Languages: Fluent English; good German is a strong advantage.
A strong plus:
Robotic hands or grippers: Tactile skins, slip detection, sensing in very tight packaging.
Acoustics or optics: Arrays, beamforming, anechoic measurement, or lens selection, illumination and depth.
Sensors in harsh conditions: Vibration, thermal cycling, cable and flex fatigue.
Listed on hirly, a job board. hirly is not the employer: NEURA Robotics is hiring for this role.
Similar jobs
- Hardware Engineer (w/m/d) Elektrokonstruktion für fördertechnische Anlagen in der AutomobilindustrieSiemens AG · Bremen, GermanyFirst seen yesterday
- Hardware Engineer (m/w/d) - Fab Automation (AMHS)European Semiconductor Manufacturing Company · Dresden, Sachsen, GermanyFirst seen yesterday
- Electronic Hardware Engineer (all gender)ALTEN Consulting Services GmbH · Schrobenhausen, Bayern, GermanyFirst seen yesterday
- IT Hardware Engineer (m/w/d)DEKRA Arbeit GmbH · Ulm, Donau, Baden-Württemberg, GermanyFirst seen 13d ago
- Forward Deployed Hardware EngineerFuro · MünchenFirst seen 14d ago
Browse similar roles
Want this one?
Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.
Tailor my resume for this job