hirly

Rivian and Volkswagen Group Technologies

Sr. Failure Analysis Engineer, Infotainment, Connectivity, Vehicle Access ECU

Palo Alto, California

hirly Pro

Get in front of the people hiring at Rivian and Volkswagen Group Technologies

  • Reach the hiring manager at Rivian and Volkswagen Group Technologies on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Rivian and Volkswagen Group Technologies, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Rivian and Volkswagen Group Technologies first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.2M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Senior
Stated salary
$107,000 – $147,200 per year
Country
US
Work mode
On-site / unstated
First seen by hirly
18 Nov 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

About Us

Rivian and Volkswagen Group Technologies is a joint venture between two industry leaders with a clear vision for automotive’s next chapter. From operating systems to zonal controllers to cloud and connectivity solutions, we’re addressing the challenges of electric vehicles through technology that will set the standards for software-defined vehicles around the world.

The road to the future is uncharted. By combining our expertise across connectivity, AI, security and more, we’ll map a new way forward. Working together, we’ll create a future that’s more connected, more intelligent, more sustainable for everyone.

Role Summary

Sustaining has shifted from a downstream function to a core strategic priority as RVT's ECU portfolio scales across brand partners. Infotainment, Connectivity and Vehicle Access ECUs need an engineer who can find the root cause wherever it sits: in the hardware, in the software, or in the interaction between them. We are seeking a Sr. Failure Analysis Engineer to join the new Sustaining Engineering and Operations team, reporting to the Sr. Manager, Sustaining Engineering and Operations.

In this role you will be the failure analysis DRI (direct responsible individual) for Infotainment and Connectivity ECUs. You will own each RMA ticket from first-level triage through teardown, root cause, and verified corrective action, following the team's root cause analysis process: vehicle data and PCAP logs, EOL and bench testing, visual inspection, component and circuit-level measurement, change analysis, and fishbone. You will apply staff-level electronic design judgment on multi-core processors, RF modules, power supplies, and high-speed designs to decide whether a failure is a manufacturing or component defect, a marginal design, or a software-hardware interaction.

You will work with Design Engineering, Product Launch Engineering, Supplier Quality, Test Automation, software and firmware teams, contract manufacturers, and engineering service partners to turn what the field and the plant teach us into design, test, process, and supplier improvements, and to feed those lessons into upstream NPI workflows.

Responsibilities

Act as the failure analysis DRI for Infotainment, Connectivity and vehicle access ECUs. Review the first-level triage report from the vehicle line or field service organization, then perform a full teardown to classify each failure as hardware, software, or component quality.

Capture the full record for every occurrence: warranty ticket number, logs, VIN, ECU serial number, odometer reading, software version, and failure date and time.

Establish the system state at the time of failure. Collect and analyze high, medium, and low-fidelity PCAP (CAN and Ethernet) logs and dashboard data to confirm the failure mode, failure signature, and software-hardware interactions. Where logs were not captured, use testing and design analysis to narrow the cause.

Reproduce and isolate on the EOL tester and the bench. Use bench testing while connected to the ECU using ethernet or can to run test / diagnostic scripts to reproduce and confirm failures

Inspect the PCBA against IPC standards and take component and circuit-level measurements (DMM, scope, impedance) with the circuit both active and dormant. Check that circuit diagnostics match the physical state.

Determine what changed. Evaluate WAS/IS across hardware revision, layout and component changes, part numbers, software version and OTA, vehicle harness, and environmental or seasonal factors. Maintain a fishbone and run the data collection that eliminates suspected causes.

Judge design margin. When components and voltages are within tolerance, assess whether the design is inherently marginal and run targeted tests with both EOL and production-release firmware.

Drive component failure analysis and supplier RMA. Submit FA tickets for X-ray, optical imaging, and impedance measurements before parts go to the supplier. Work with contract manufacturers on date codes, lot codes, and purchasing information to size the suspect population and evaluate containment.

Separate defects from root cause. Where a defect is found, confirm by analysis that it caused the customer complaint; if not, open a separate RC to track the quality issue.

Drive corrective action to closure with Design Engineering (design changes through ECO / ECR), Product Launch Engineering (process improvements), Supplier Quality (quality control), Test Automation (test coverage at the CMs), and software and firmware teams.

Support failure investigations in both development and production builds, work onsite with contract manufacturers, and provide integration support for Infotainment and Connectivity ECUs within the vehicle platform.

Document findings and lessons learned, and feed them into design and test standards for upstream NPI programs.

Qualifications

Minimum Qualifications:

Bachelor's degree in Electrical Engineering with 5+ years, or a Master's degree with 2+ years of relevant experience.

Strong fundamentals in analog and digital electronics, and a solid understanding of systems engineering principles and requirements flow-down.

Hands-on root cause experience on electronic assemblies: bench debug with DMM, oscilloscope, and electronic loads, and adherence to best lab practices.

Experience reading schematics and PCB layout, and familiarity with circuit simulation tools or MATLAB for worst-case circuit analysis.

Structured problem-solving methods such as 8D, 5-Why, FMEA, and fishbone, applied to closure.

Experience working with contract manufacturers in a build-to-print model, including onsite quality escalation, containment, and corrective action verification.

Experience with Atlassian-based applications, including Jira and Confluence.

Excellent written and verbal communication skills, able to document findings clearly and escalate factually.

Ability to travel domestically and internationally to contract manufacturer, supplier, and vehicle program locations as needed.

Eager to explore AI-driven solutions across communication, reporting, visualizations, and analysis.

Preferred Qualifications

Experience in high-compute Infotainment and Connectivity ECUs in a software-defined vehicle architecture.

Depth in the design areas where these ECUs fail: high-speed design, signal integrity and power integrity, thermal strategy, and EMI/EMC on multi-core processor platforms.

Experience with RF modules, including RF circuit design, simulation, and tuning in ADS using both simulation data and real-world testing.

Proficiency with CAN and Ethernet capture tools such as CANalyzer, and with ECU diagnostics such as DID reads and IOCBI controls.

Experience with component failure analysis techniques, including X-ray, optical imaging, and impedance measurement, and with supplier RMA and component traceability by date code and lot code.

Familiarity with ECO, ECR, and deviation workflows.

Proficiency in Python or a similar scripting language for automation, testing, and log analysis.

Experience working with third-party engineering firms to amplify engineering resources.

Total Rewards

We build the exceptional — and we believe the people doing that work should be rewarded accordingly. In addition to a competitive base salary, full-time positions may be is eligible to participate in our annual company performance bonus program.

Payments are discretionary and not guaranteed; actual amounts depend on company results and the terms of the plan in effect, and require active employment at the time of payout. This role is also eligible for equity in the form of Restricted Stock Units (RSUs), subject to board approval and the terms of our equity incentive plans, including applicable vesting requirements.

In addition to our compensation programs, we invest in our people with a comprehensive benefits package designed to support the health, wellbeing, an

Original posting on Rivian and Volkswagen Group Technologies's site ↗

Listed on hirly, a job board. hirly is not the employer: Rivian and Volkswagen Group Technologies is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job