hirly

Metrea

Structures Analyst

Tampa, FL

hirly Pro

Get in front of the people hiring at Metrea

  • Reach the hiring manager at Metrea on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Metrea, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Metrea first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
US
Work mode
On-site / unstated
First seen by hirly
6 Nov 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Company Overview

Metrea delivers effects-as-a-service to national security partners across five domains and more than a dozen mission areas. These include airborne ISR, electronic warfare, secure communications, aerial refueling, special air missions, aerial firefighting, and advanced simulation. We own the whole stack: designing, building, and operating turnkey capabilities that give our partners decisive, asymmetric advantage against rapidly evolving threats.

Our operating model is built around three interlocking pillars. The Support Groups provide a global shared-service – spanning people, finance, platform, operations, legal, and engagement. This frees up our Core Groups, who develop and own mission capabilities end-to-end, to focus entirely on delivery. The Market Groups apply a regional lens, ensuring that our agile and adaptable capabilities remain aligned to the wicked problems that matter most to our partners across the Americas, EMEA, and Asia-Pacific.

At the heart of our model is a simple but powerful idea: be a true partner with skin in the game. Our partners need effects, not just equipment. By owning the full stack – from the lab to the field – we are able to drive a continuous cycle of innovation that keeps our partners ahead. It's a fast-moving, intellectually demanding environment where talented people are given real responsibility, work on problems that matter, and contribute to an enterprise that is growing quickly and deliberately.

Headquartered in Washington, DC, with facilities across the United States, the United Kingdom, as well as Continental Europe and Asia-Pacific.

Group Overview

Aerospace Engineering Group (AERO) provides an integrated, end-to-end capability for the rapid modification and fielding of mission-specific aircraft. The Airborne Asset Adaptation (A3) Cell acts as the central command and coordination hub, managing requirements and external interfaces from inception to operational delivery. Specialized technical execution is delivered by the Aircraft Integration Centre (AIC), a Part 145 facility focused on airframe modification, and Aerospace Design (ASD), which provides organic design engineering and FAA-authorized certification. Collectively, these elements bridge the gap between initial requirements and the deployment of flight-certified, mission-ready assets.

Position Summary

In the Structures Analyst role, you will analyze and substantiate aircraft structural modifications that enable special mission equipment integration across general aviation, business, transport, and military derivative aircraft. You will evaluate structural strength and durability, develop analysis models and calculations, and prepare substantiation reports supporting design decisions and certification. You will support major alterations and Supplemental Type Certificate (STC) projects involving the FAA and the Peregrine Organization Designation Authorization (ODA). You will work with design engineers, certification personnel, and installation teams to establish analysis requirements, resolve structural issues, and demonstrate compliance with the applicable project certification basis.

What You'll Do

Review customer requirements, aircraft drawings, installation concepts, and certification requirements to define structural analysis scope, assumptions, and required substantiation

Establish applicable load cases and load paths with design and certification teams, including inertial, aerodynamic, pressurization, and ground loads as relevant to the modification

Perform classical hand calculations and finite element analysis (FEA) of equipment supports, joints, fasteners, sheet metal and machined parts, sandwich panels, and affected aircraft structure

Evaluate stresses, deflections, joint loads, yielding, ultimate strength, and buckling; select and document material allowables, factors, failure criteria, and margins of safety

Develop and verify finite element models, documenting idealization, mesh convergence, boundary conditions, and load application. Check results against independent calculations and available test data

Assess fatigue and damage-tolerance implications where applicable. Perform analyses within demonstrated competence and coordinate specialist support for work outside that scope

Prepare configuration-controlled structural substantiation reports documenting methods, inputs, assumptions, results, limitations, and compliance conclusions for technical review and approval

Recommend design changes, assess installation deviations and engineering changes, and support structural test plans, test-data evaluation, and resolution of analysis-to-test discrepancies

Participate in aircraft surveys and design reviews; coordinate with FAA and ODA personnel through established project channels; and resolve technical review comments and maintain analysis traceability

What You Bring

Experience with special mission aircraft modifications, equipment racks, mounting provisions, and structural integration of mission systems

Experience supporting major alterations or STC projects in coordination with FAA or ODA certification personnel

Familiarity with structural substantiation documentation, aircraft certification requirements, and configuration-controlled technical data packages

Working knowledge of aircraft structural design fundamentals, sheet metal and machined-part fabrication, materials, fasteners, and corrosion protection

Ability to interpret aircraft drawings and technical data and translate survey information into accurate, buildable designs

Ability to prepare clear engineering documentation and communicate effectively with engineers, technicians, project managers, and customers

Ability to manage concurrent assignments, identify technical risks, and seek clarification or escalate issues when needed

At least two years of relevant aircraft structural stress analysis experience, including substantiation of aircraft components, equipment installations, or modifications

Working proficiency with an engineering finite element solver and pre/post-processing tools, with the ability to explain modeling choices and independently check results

Working knowledge of statics, strength of materials, structural mechanics, aircraft load paths, metallic material behavior, joint analysis, and structural stability

Ability to perform classical stress calculations, select appropriate material allowables, and calculate and interpret margins of safety for relevant failure modes

Ability to interpret aircraft drawings and 3D models and document analysis assumptions, methods, results, and limitations in clear technical reports

Ability to work with design engineers and certification personnel, manage concurrent assignments, and identify and escalate technical risks or missing data

Proficiency with engineering calculation tools, such as Mathcad or controlled Excel worksheets, and Microsoft Office applications

Additional Eligibility Qualifications

Experience substantiating special mission aircraft modifications, equipment racks, mounting provisions, and changes to existing airframe structure

Experience preparing structural compliance reports for major alterations or STC projects involving FAA, ODA, or delegated engineering review

Experience with fatigue and damage-tolerance methods, vibration or modal analysis, or structural test planning and correlation

Experience analyzing honeycomb sandwich panels, bonded joints, or composite structures, and applying recognized aircraft structural analysis methods and material allowables

Familiarity with SolidWorks or similar CAD tools, configuration management, and scripting or automation of repeatable analysis tasks

Benefits

Comprehensive medical plan options

HSA/FSA accounts

Dental and vision coverage

6% employer 401(k) match

Fully paid parental leave for all new parents

Generous PTO

Life and disability insurance

Original posting on Metrea's site ↗

Listed on hirly, a job board. hirly is not the employer: Metrea is hiring for this role.

Browse similar roles

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job