hirly

Octavia Carbon

Thermo-Fluids Engineer

Nairobi, Nairobi

hirly Pro

Get in front of the people hiring at Octavia Carbon

  • Reach the hiring manager at Octavia Carbon on LinkedIn, from your own account
  • hirly applies to this job for you, with unlimited applications
  • A resume and cover letter written for this job, unlimited
  • The hiring manager and recruiter at Octavia Carbon, with contact details
Get Pro for this job →

$49 a month · ₹1,999 for 30 days in India · cancel any time

See how you match this job — and similar ones. Free.

Upload your resume and hirly scores it against this role at Octavia Carbon first, then against similar open jobs, and shows where you fit and why.

PDF or DOCX, up to 12MB. No sign-up to see your matches.

Get past the screening software and onto a recruiter's desk

hirly rewrites your resume for this job — matching the keywords and skills in the posting, moving your most relevant experience to the top, and writing a cover letter to fit. About 30 seconds.

  • Keywords matched to this posting
  • Fit score before you apply
  • Cover letter included

Matched against 2.8M live jobs from 220,000+ employers in 200+ countries.

Tailor my resume for this job →

Apply from your AI assistant

Connect hirly to Claude or ChatGPT and ask it to apply to this job. hirly tailors your resume, fills the employer’s form and asks before sending.

Some employer sites stop an application at a CAPTCHA or sign-in and hand it back with a link. Applying needs a paid plan. Works with any assistant that supports MCP.

hirly's read of this role

Seniority
Mid level
Country
KE
Work mode
On-site / unstated
First seen by hirly
4 Nov 2026

Derived automatically from the posting. Upload your resume above to see how the role scores against it.

the posting

Role : Thermo-Fluids Engineer

Department: Product

Job type: Full time - On site

Location: Eastern Bypass Rd, Ruai – Nairobi, Kenya

About Octavia Carbon

Octavia Carbon is the Global South’s first Direct Air Capture (DAC) company, dedicated to combating climate change by removing carbon dioxide from the atmosphere. We design and build low-cost DAC technology that leverages Kenya's geothermal energy, geology, and talent to radically accelerate DAC down the cost curve. Our mission is to reverse climate change by removing billions of tons of carbon dioxide from the air by 2050.

Role Overview

We are looking for a Thermo-Fluids Engineer to own the thermal and fluid performance of our reactor and air flow systems. You will work at the centre of the design loop: modelling airflow, pressure drop, heat transfer and energy use, validating those models against test data, and turning the results into design decisions that improve capture performance and reduce energy per tonne of CO₂.

K ey Responsibilities

Airflow and pressure-drop design

Design and optimise air distribution hardware (diffusers, plenums, nozzles, louvres and ducting) to achieve uniform flow across sorbent beds with minimum pressure loss.

Model flow through porous sorbent structures, including resistance characterisation , flow uniformity and suppression of recirculation and draft effects.

  • Size fans and blowers against system pressure-drop budgets, and
  • identify the dominant loss contributors in the flow path.

Heat transfer and thermal systems

Specify and size insulation systems for vessels operating under thermal cycling and vacuum

  • Design steam distribution and purging strategies, and
  • eliminate dead zones where steam or air does not reach the sorbent.

CFD and simulation

Set up, run and post-process CFD simulations (steady and transient, including conjugate heat transfer) and ensure meshes, boundary conditions and solver settings are defensible.

Establish simulation workflows and templates that other engineers can reuse, and document assumptions and limitations clearly.

Use hand calculations and spreadsheet models to sanity-check simulation results and to explore design space quickly.

Test, instrumentation and validation

Plan and run experiments on pilot and test systems, and specify the instrumentation (pressure, temperature, flow and humidity sensors) needed to capture the right data.

Diagnose discrepancies between predicted and measured performance, including measurement errors such as probe orientation and sensor placement.

Analyse operating data from field systems to track performance degradation and feed lessons back into design.

Contribute to technical reports, design reviews and updates for leadership, investors and partners, communicating conclusions clearly and quantitatively.

Q ualifications

Bachelor’s degree in Mechanical E ngineering

Strong grounding in fluid mechanics, heat and mass transfer, and thermodynamics, with the ability to apply them to real hardware.

  • Hands-on experience with a commercial CFD package (e.g. , Ansys Fluent or equivalent)
  • is preferred but not a requirement to apply for the role .

Working knowledge of CAD ( e.g. SolidWorks, Inventor, etc )

Proficiency in building engineering calculation tools in Excel or Python.

Clear technical writing and the ability to present findings concisely, with conclusions first.

Applications must be submitted no later than Tuesday, 10 th November 2026 by 11:59pm . Applications will be reviewed on a rolling basis.

Octavia Carbon offers a competitive salary, a route to company equity, strong growth opportunities and a high degree of professional freedom and responsibility in a fast-paced environment with a steep learning curve.

Octavia Carbon is an equal opportunity employer and especially encourages applications from women, and individuals from diverse socioeconomic, religious and regional backgrounds.

Original posting on Octavia Carbon's site ↗

Listed on hirly, a job board. hirly is not the employer: Octavia Carbon is hiring for this role.

Want this one?

Upload your resume and hirly rewrites it for this job and writes the cover letter — in about thirty seconds, before you sign up.

Tailor my resume for this job